Electronics Forum | Sun Mar 04 12:25:25 EST 2018 | reckless
I am looking at a Universal Instrument Machine that accepts 24V/42V feeders. What is the benefit of the newer feeders? Which ones are more reliable for 8mm? Why are they so expensive? Pneumatic Yamaha run $50 new from china.
Electronics Forum | Wed Apr 26 01:59:01 EDT 2023 | ttheis
Thanks, what about the camera calibration? Does it use the same kit as the GSM machines?
Electronics Forum | Tue Apr 25 20:22:32 EDT 2023 | ttheis
We have a line running GSM1 machines and we are considering upgrading to GX-11S machines with FJ3 heads. Does anyone know if the GX-11S machines can take pneumatic feeders from the GSM machines? We have a very large inventory of the pneumatic and ele
Electronics Forum | Wed Apr 25 11:51:39 EDT 2018 | emeto
Pick and place machine is as good as the feeder is. Electronic fast feeders with precise servomotors will be no match for a pneumatic feeder. Price however, will be different as well.
Electronics Forum | Wed May 03 13:27:32 EDT 2023 | dilogic
Genesis should work with pneumatic feeders, but not if Lightning heads are used. It's basically 24V transformer and some wires and fuses - you can do this "upgrade" by yourself, actually. Regarding cal. kit - it's the same as for GSM's but, again, no
Electronics Forum | Fri Apr 30 07:29:02 EDT 2021 | dilogic
Status output is pin 2. On pneumatic feeders it only shows if the feeder is inserted, on electric feeders it doubles as feeder insertion and goes off if the tape is exhausted or feeder is jammed
Electronics Forum | Fri Oct 28 09:44:11 EDT 2005 | PWH
I'm considering buying a UIC Advantis P&P machine. I'm worried about the huge, additional cost of new feeders. We've been running GSM's for years so we have tons of GSM vibe bases, tracks and feeders. UIC tells me that old pneumatic GSM feeders ca
Electronics Forum | Fri Jan 16 16:01:31 EST 2015 | emeto
GSMs are great machines for many parts, but for the small parts you should look for something better and more contemporary. As it was mentioned in one of the previous posts, the feeder is a big key. I don't think there is feeder for GSM that can supp
Electronics Forum | Wed Apr 28 15:18:17 EDT 2021 | dilogic
24V feeders are very simple to interface. You have supply voltages (24VAC, 12VDC), status output and control input (advance). All signals are using 12V levels. To advance feeder pull control input to GND. Connect status output to +12V with a pull-up
Electronics Forum | Mon Mar 05 11:21:50 EST 2018 | spoiltforchoice
Why are they so > expensive? Feeders are expensive, you can easily have considerably more invested in feeders than the placement machine. On new machines you won't find feeders coming in at much less than $500/each, often considerably more. As a r
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
I.C.T Industrial Park, Building 1
Dongguan, 30 China
Phone: +86 13670124230
