Electronics Forum | Thu Aug 06 20:08:35 EDT 2015 | edwaterfall01
It could be a blown fuse on the power distribution panel or a failed power supply. Check the power distribution board in the front lower center of the machine. There are 11 LEDs on the board and 10 should be ON
Electronics Forum | Mon Apr 15 21:00:57 EDT 2013 | dman97
Hi, I have another problem. This time with a vintage 1995 GSM machine. Upon startup, I am seeing a part to pad LED tower time out. The GSM knowledge base says to change they relay at CR1 on the power distribution board. On this machine, the power
Electronics Forum | Wed Apr 24 15:38:02 EDT 2013 | dilogic
Check the fuses on the power distribution panel. All of them have indicating LED, so check is easy. Maybe 24V feeder supply is out...
Electronics Forum | Fri Aug 07 18:09:55 EDT 2015 | bnorton
The power distribution board has 10 green LEDs on. By the time of the error SysFail is still on. Logicomm connected to the Force board COMM2 shows a stream of messages saying "Lantern system not active. Heart Beat = 0"
Electronics Forum | Wed Apr 28 15:23:47 EDT 2021 | procyon
Hello Deni, Thanks for the comment. Could you provide a bit more information as to what pins are used to accomplish this specifically for Universal Instruments Blue label older feeders? Here is the pinout I got from UI but it does not show a statu
Electronics Forum | Thu Sep 10 15:29:15 EDT 1998 | matthew park
Tim, What is it? Which ones are you talking about: 0.080" vs 0.008", 0.100" vs 0.010", or 0.050" vs 0.005" pitch devices . If you are saying 0.080",0.100" and 0.050", any pick and place machine can handle that. Well if not, one machine that is ca
Electronics Forum | Wed Oct 09 08:36:44 EDT 2002 | pjc
Operation features of many devices, machine components, instruments depend substantially on state of their surfaces. Selective surface processing by high-intensity energy beam (ion, electron, laser treatment) is one of the most perspective directions
1 |