Electronics Forum | Wed Mar 27 13:35:42 EST 2002 | lysik
We do need to buy American. I only run Universal Instruments machines in my facility. Mind you the chip shooter is manufactured by Sanyo but the GSM machines are made in NY. I have purchased over 200 systems over the years while working for a major C
Electronics Forum | Tue Oct 01 17:56:10 EDT 2013 | swag
I'd take a look at the power supply for the failed axis and see if it's still working. I've also seen encoders fail on motors but it's rare in my experience. Usually it's a power issue.
Electronics Forum | Thu Dec 07 00:41:19 EST 2006 | bigdaddysoy9
Hello SMTnet, I would like to make a power supply for Universal multi pitch feeders so I can index them offline. How much voltage do I need to get to what pins of the connector? Thanks.
Electronics Forum | Thu Aug 06 20:08:35 EDT 2015 | edwaterfall01
It could be a blown fuse on the power distribution panel or a failed power supply. Check the power distribution board in the front lower center of the machine. There are 11 LEDs on the board and 10 should be ON
Electronics Forum | Fri Dec 08 08:57:58 EST 2006 | MGC
Hello SMTnet, > > I would like to make a power > supply for Universal multi pitch feeders so I can > index them offline. How much voltage do I need to > get to what pins of the connector? Thanks. http://hoverdavis.com/Products/universal/mpup/uf
Electronics Forum | Tue May 30 10:17:07 EDT 2000 | g cronin
I thought I saw that there is a retro kit required to supply the proper power to the multi pitch feeders from older machines. Check the Universal web site for info on the multi pitch I think that is where I read about it...
Electronics Forum | Tue Dec 19 09:55:16 EST 2006 | bsteffen
If you call up Universal tech support at 1-800-842-9732, any of those guys or gal would email you the schematics to the MPUP feeder setup station.
Electronics Forum | Wed Apr 24 15:38:02 EDT 2013 | dilogic
Check the fuses on the power distribution panel. All of them have indicating LED, so check is easy. Maybe 24V feeder supply is out...
Electronics Forum | Wed Apr 02 09:45:25 EDT 2014 | swag
Not sure what kind of humidifier you are looking at but here's my experience: We have 4 humidifiers. All are ultrasonic supplied with DI water. They work well but... UT humidifiers will create a foggy white residue that will stick to things in cl
Electronics Forum | Wed Apr 28 15:23:47 EDT 2021 | procyon
Hello Deni, Thanks for the comment. Could you provide a bit more information as to what pins are used to accomplish this specifically for Universal Instruments Blue label older feeders? Here is the pinout I got from UI but it does not show a statu
