Electronics Forum | Thu Aug 16 04:55:06 EDT 2007 | escalador
Hi: The serial number of the machine is:4681A09051-6-45955404. I dont know the soft version as I did not connect it yet because I am looking for a 3 phase transformer with 230V output for mains. Thanks
Electronics Forum | Fri Aug 17 13:18:44 EDT 2007 | dilogic
Speaking of network connection - I can't get our GSM running on OS/2 ver 2.x to talk to our local (MSWIN) network. Any quick guide - how you did it? kind regards Dejan
Electronics Forum | Tue Aug 21 09:01:14 EDT 2007 | escalador
Hi Mika: It would be great to know the specs required for the transformer as I have a trasformer manufacturer here able to do it. I saw that the machine uses 3 phase without Neutral (230V each)30 amps. These 30 Amps are total or each phase? Regards
Electronics Forum | Mon Jan 14 08:56:30 EST 2008 | geb
Hi, The machine is a Universal GSM1 flexhead. Is it possible to just change the lens of a 2.6mil camera for a 1mil or 0.5mil lens. Or do I have to buy a complete camera assembly to do this? Thanks, Grant
Electronics Forum | Thu Aug 20 08:42:32 EDT 2009 | voytek
Do you know if I can use Multi Pitch Tape Feeder from GSM2 platform on GSM and GSM1 platform? Thank you,
Electronics Forum | Fri May 14 07:20:48 EDT 2010 | jdengler
Check with Unidec. http://www.unidec.com/ We used to get many Universal boards repaired by them. Jerry
Electronics Forum | Thu Apr 18 14:04:11 EDT 2013 | dilogic
Are you trying to bring up to life an old machine or the problem just started to appear? There might be several causes for this problem. As a quick fix, you can change in th settings logic polarity of that signal, so it will be OK when actually not.
Electronics Forum | Fri Apr 19 01:46:20 EDT 2013 | dman97
This machine had been off for a few months. After we booted it a few days ago, this problem popped up. How exactly would I change the logic polarity?
Electronics Forum | Mon Apr 22 04:19:09 EDT 2013 | dilogic
Parameters->Miscellaneous I/O then select Inputs and scroll down to REAR_P2P_TOWER_DOWN, select appropriate input and change State field from 1 to 0, then press OK and save.
Electronics Forum | Wed Apr 24 12:47:25 EDT 2013 | smtventasmex
Hi i am not local i am at texas, but as soones what i can do for you is offer parts if you need vhmadero@smtvys.com