Electronics Forum | Tue Oct 01 17:56:10 EDT 2013 | swag
I'd take a look at the power supply for the failed axis and see if it's still working. I've also seen encoders fail on motors but it's rare in my experience. Usually it's a power issue.
Electronics Forum | Tue Oct 01 18:44:24 EDT 2013 | richardconnell
Hi, I have limited capability on the Z axis. The axis will home to the mechanical switch limit and then drop to a point which I asssume to be the fiorst zero point below the mechanical switch limit. Then it gives the error. There is power to the mo
Electronics Forum | Wed Dec 17 10:24:51 EST 2003 | kauerr
Hey, go to http://www.uic.com it is the Universal Instruments website. Universal sells HSP 4796 machines. These are actually Sanyo TCM 3000 Machines. We have 4 of them, they are awesome machines. Hope this helps, Curt
Electronics Forum | Thu Jan 14 10:25:36 EST 1999 | J. Coogan
Doug The 4796A and 4796R machines maintain maximum tact time within an XY table movement window of approximately 17mm. In addition, due to their ability to perform "on-the-fly" theta correction, they are also able to maintain top speed for a larger
Electronics Forum | Tue Sep 01 09:46:12 EDT 1998 | J Coogan
Mike FYI SANYO chipshooters are sold/serviced worldwide through two sources; Nissei Sangyo Trading Co. (which is a division of Hitachi), and Universal Instruments Corp (http//www.uic.com). Contrary to popular belief, SANYO High-Technology Co., Ltd.
Electronics Forum | Fri May 16 13:30:10 EDT 2003 | T.Vick
Tom, You've recieved some good feedback so far... keep in mind that both models of machines you have utilize a 4x40 configuration. This allows for even greater flexibility if your jobs are small enough. We also offer Dual Track Feeders to shrink t
Electronics Forum | Tue May 28 08:55:25 EDT 2002 | pjc
Rick, Here is a piece written in, I belivee the April issue SMT Magazine: Binghamton, N.Y. Sanyo High Technology and Universal Instruments Corp. have renewed an agreement whereby Sanyo will continue to provide the HSP line of chipshooters sold und
Electronics Forum | Wed Jun 11 16:30:33 EDT 2003 | T.Vick
You have received some great feedback so far. I would like to summarize and add a few points regarding maintenance. You should start (as recommended already) by verifying your component library data. Using the default values from the master library i
Electronics Forum | Mon Jan 18 11:27:54 EST 1999 | J. Coogan
Greg Please call us at 607-779-7497 to talk to one of our HSP Technical Specialists. We'd be glad to help. J. Coogan Universal Instruments Corp.
Electronics Forum | Fri Jun 16 17:30:04 EDT 2000 | Eutectic state
Go with Universal. We had Fuji equipment for years. That is all but phased out now and we only are buying Universal. You cannot beat their service. The chip shooters are great. The only cons that I have dealt with is the learning curve on the n
