Electronics Forum | Tue Apr 08 09:56:58 EDT 2008 | slthomas
Is it a factory (Universal, Panasonic, etc.) holder or aftermarket? We used to use Fancort holders on our Universals and they're definitely still around.
Electronics Forum | Wed Apr 09 03:21:36 EDT 2008 | fnorradd
Hi Steve, The adjustable workboard holders are a mixture of universal and aftermarket, they do not use the clamp down arms which were originally with the universal pbs holders, they are the type which have two grub screws holding the clamps to the h
Electronics Forum | Mon Sep 17 14:45:10 EDT 2007 | jeffharley
Are you using adjustable workboard holders or dedicated ones? Are both heads lined up exactly the same(using the b.e.c. template? Are parts formed correctly and lined up with the component holes on both sides(heads)?
Electronics Forum | Wed Aug 29 00:13:24 EDT 2007 | slthomas
The two factories I've worked at that ran Radial Lead inserter/sequencers were both building their own products and we were able to specify our own panelization guidelines. One-half inch rectangular frame on all boards. Our universal workboard hold
Electronics Forum | Thu Aug 02 22:33:24 EDT 2007 | simsj
We've had some experience with Universal's machines as well. Aside from the mechanical problems you're experiencing, that level of control hardware is susceptible to power spikes/fluctuations. Save yourself some trouble later on and get a good UPS.
Electronics Forum | Mon Jul 30 15:28:25 EDT 2007 | gmoritz
I'm posting a diary of the major repair experience that we had this weekend. I'll follow up with a shorter post that sort of summarizes a few things. ------------------------------------------------ The service guys showed up at our facility about
1 |