Electronics Forum | Fri Sep 23 08:27:28 EDT 2005 | siverts
The 7 spindle Flex jet head, can only pick max 7 comps. from the GSM base machine in a single operation, not from the shuttle. The Flex jet head is faster in z-axis and will also use the OTHC (On The Head Camera) to inspect most of Your smaller comps
Electronics Forum | Fri Oct 12 10:34:53 EDT 2018 | reckless
1 million picks a week is the highest figure I have heard. The lightning head is SMT poetry in motion. I do hope to get one someday, not sure how bad maintenance is on one of them. I have a 2004 GI-14D with 2 flexjet3 heads with 50 million picks
Electronics Forum | Fri Aug 25 23:54:26 EDT 2006 | mika
If You adjust the focus to perfection, You still need the UIC GSM calibration kit, so that the machine will know where the spindles are according to the cameras (OTHC, P2P:s, fiducial camera), X-Y-Theta-spindles, nozzle changer, feederbanks and mach
Electronics Forum | Tue Jun 28 11:45:27 EDT 2011 | jax
I have multiple machines consisting of a mix of the following: Single beam Lightning head machines (Advantis, Lead Screw) Dual Beam Seven Spindle machines (Genesis, Linear Drive) Single Beam Seven Spindle Machines Advantis, Lead Screw) The vintage ra
Electronics Forum | Tue Oct 09 12:28:08 EDT 2012 | jrcline43
Do you have or know of a procedure/manual for calibration on universal instruments HSC/Genesis/Flexjet feeders?
Electronics Forum | Thu Nov 10 15:26:44 EST 2011 | jfuller
I am looking for someone that has the equipment and the expertise to repair and calibrate Universal HSP 4796 feeders. Does anyone know of someone that does this?
Electronics Forum | Thu Jul 05 04:29:27 EDT 2018 | sophyluo1985
Hello Everyone, Is there anyone know how to calibrate the Universal GOLD feeder? Thank you!
Electronics Forum | Mon Jul 09 05:31:38 EDT 2018 | sophyluo1985
Hello Everyone, Is there anyone know how to calibrate the Universal GOLD feeder? Thank you!
Electronics Forum | Wed Sep 01 07:49:32 EDT 2010 | sachu_70
Hi Namruht, One question, what exactly are you wanting to achieve using "feeder calibration? In what way would feeder calibration make these feeders (between Siemens and Universal) compatible? Or maybe i misunderstood your point .....
Electronics Forum | Sat Sep 18 03:50:23 EDT 2010 | vinitverma
I know of Ambitec (Taiwan). They make feeder calibration jigs where the base is common for all types of feeders. You just need to replace the jig on the base depending on the feeders you're trying to calibrate. They provide base as well as jigs for m
.gif)
winsouce.jpg)