Electronics Forum | Wed Oct 01 15:24:55 EDT 2014 | horchak
are you trying to lengthen or shorten the lead length? Lengthening the amount of lead being cut off and going into the scrap tube will shorten the lead length. Lead length is pretty much determined by the down stop setting on the insertion head, the
Electronics Forum | Wed Oct 01 07:22:11 EDT 2014 | oguzdtas
First all, I am very new about all this stuff so please forgive me if i say anything wrong. We are using a universal vcd axial. We had a problem with cut and clinch. We blieve if we lengthen the wreck material going inside the tubes, the problem wil
Electronics Forum | Tue Jul 21 14:14:50 EDT 2020 | emeto
Universal instruments used to build this kind of equipment back in the days. Not sure if they still do it.
Electronics Forum | Wed Sep 11 20:36:04 EDT 2013 | action_101
UIC still manufacturers new thru-hole machines. Both axial and radial insertion models are available. They stopped making the multi-mod dip inserters in '91 or '92. And parts are easily acquired for any older models, there were a ton of machines out
Electronics Forum | Tue Jul 21 14:35:31 EDT 2020 | charliedci
Yes, we have an old Universal axial and they still offer independent machines for axial, radial and DIP components, but I do not have the floor space for that. Some offer "odd form" insertion machines (Juki, Hanwha, Cenncorp)which is the direction I
Electronics Forum | Thu Sep 12 20:17:59 EDT 2013 | action_101
Good ole contact cs-400. I worked at two different companies that had these machines, all I believe were E's except 1 C. One place had one and the other place had 4 of them. Dont take this personally, but thank god my current employer doesn't have a
Electronics Forum | Tue Nov 02 16:57:45 EDT 2021 | rstellema
I am in need of a technician experienced in repairing older through hole machines (Universal Model 6241B). I'm located in Montreal, Quebec, Canada. If you know of someone, please contact me or respond to this posting. Thank you, Ron
Electronics Forum | Mon Sep 09 16:29:56 EDT 2013 | gregp
Hi Everyone, I'm looking for some feedback about through hole assembly requirements today vs. yesteryear. As I see it, there are two main categories...legacy through hole and new through hole with mixed technology. The legacy stuff is older designs
Electronics Forum | Tue Oct 01 15:48:56 EDT 2002 | lysik
No problem. A standard stencil is OK. You want to print a half moon shape on each side of the hole. Make sure you print about X2 the size of your hole and make sure you keep the print in close to the hole. You want to print X2 the hole size as to hav
Electronics Forum | Tue Oct 01 16:18:16 EDT 2002 | davef
Q1: Is this [paste in hole] feasible? A1: Yes, many people lower their operating cost by reflowing through hole components. Q2: What types of components are difficult to do this way [paste in hole]? A2: Types of through hole components that are d
