Electronics Forum | Mon Aug 23 12:06:37 EDT 2021 | mk15
Hi, I am looking for a an Electrical Service Manual for a Universal Universal sequencer vcd 6241d. thanks
Electronics Forum | Mon Aug 23 13:39:25 EDT 2021 | charliedci
Try Dan at swuicsup@yahoo.com. He carries parts and knows these machines well.
Electronics Forum | Tue Sep 18 08:14:31 EDT 2007 | jeffharley
This would not produce the condition that Darron is seeking help for as the vcd would stop due to not seeing a clinch in signal with a mechanical jam.
Electronics Forum | Tue Sep 18 15:15:10 EDT 2007 | jdengler
Jeff, You assume too much. Not all VCD's had clinch in sensors. Darron did not tell us what vintage this machine is so what habsfan said could be the problem. We need more information to help. Does the machine stop when it doesn't cut the lead? D
Electronics Forum | Thu Nov 18 15:07:27 EST 2004 | valuems
Hello Boy this sure brings back memories from the years past. Was a field engineer for universal for about 9 years. Worked almost exclusively on the Rad 1 and Rad 2. The first thing that I would do is remove the sequencer head that fires at the sa
Electronics Forum | Thu Nov 18 16:57:55 EST 2004 | jdengler
I rebuilt 6348A's for about 13 years. Check the contact at the clip locator. It's dirty, broken, or the wire is starting to come out of the crimp. Jerry
Electronics Forum | Wed Oct 01 15:24:55 EDT 2014 | horchak
are you trying to lengthen or shorten the lead length? Lengthening the amount of lead being cut off and going into the scrap tube will shorten the lead length. Lead length is pretty much determined by the down stop setting on the insertion head, the
Electronics Forum | Wed Oct 01 07:22:11 EDT 2014 | oguzdtas
First all, I am very new about all this stuff so please forgive me if i say anything wrong. We are using a universal vcd axial. We had a problem with cut and clinch. We blieve if we lengthen the wreck material going inside the tubes, the problem wil
Electronics Forum | Thu Nov 18 13:44:50 EST 2004 | ehess
I know this is not a SMT machine, but I thought I might find someone on here who could help me. We have an old Universal 6348A Radial lead inserter. The problem we are having is the chain will stop, periodically, before the chain stop status wheel
Electronics Forum | Thu Nov 18 13:45:20 EST 2004 | ehess
I know this is not a SMT machine, but I thought I might find someone on here who could help me. We have an old Universal 6348A Radial lead inserter. The problem we are having is the chain will stop, periodically, before the chain stop status wheel
