Electronics Forum | Fri Apr 02 15:41:38 EST 2004 | azdback
You may also want to start on the component library. Hypotetically speaking, the GSM shows the component as follows in the component library: One lead to the right, 3 leads to the left. This is the feeder default orientaion and it will be 0 degrees.
Electronics Forum | Mon Jun 14 23:12:32 EDT 2004 | Rodion Pronin
Hello Ricardof I believe speaking of your example, huge boards with many components on them, a very important aspect would be the sequence in which you place your components on the board... It happends that I have a software that optimizes assembly
Electronics Forum | Wed Jun 30 10:24:27 EDT 2004 | K
We find keeping the work environment at about 22degC and humidity to about 40-50% is the best way to control the solder balls. Before we took measures we were out of control with solder balls especially in the summer months. We run aqueous solder thr
Electronics Forum | Tue Jul 06 17:10:19 EDT 2004 | Pete
Quality, consistency and labor savings all wrapped up into one nicely packaged piece of electro-mechanical marvel called AOI. Look for the number of templates one can store per component, lighting options, can it do through hole? Look at reporting
Electronics Forum | Fri Aug 06 11:07:49 EDT 2004 | JB
"I thought it was purely a mechanical up-down movement with the cam and hence the thickness hardly has any effect!" It is purely mechanical.On our high speed turret the machine knows the distance between the tip of the nozzle and the top surface of
Electronics Forum | Mon Aug 09 07:42:52 EDT 2004 | C Lampron
Michael, We have a DRS-24 and are very happy with it. Look at the wobble in the nose cone that holds the nozzles and make sure it does not move. This will degrade your placement acuracy. The machine is very process oriented meaning that you can not
Electronics Forum | Wed Sep 08 20:48:28 EDT 2004 | Darby
Yes I agree with Russ about someone asking up front and everything else. Two tips. 1. Keep the marks at least 5mm in from the conveyor edges of the pcb so that clamping systems do not hide the mark. 2. Make sure the marks are eccentric around the pcb
Electronics Forum | Wed Sep 08 01:10:30 EDT 2004 | alan
We have an issue with our Seho Wave solder machine. The machine is an 8040C, early 90's model. The problem is that continues to heat the solder up, even once it has reached its specified temp. If we set it for 250 degrees, it will go to 250 then c
Electronics Forum | Tue Oct 12 13:40:14 EDT 2004 | Jimmy
We recently went through an evaluation period of an NXT modular setup. We ended up purchasing the 2XM6 setup mainly due to the board length limitation of less than 10 inches for the M3 modules without splitting feeders. The machine has been extremel
Electronics Forum | Fri Oct 29 15:29:56 EDT 2004 | jasont
Hi Ran, Have you considered 2nd hand screen printers? We are an SMT equipment re-seller but also operate a subsidary CM factory in SuZhou, China . We use Dek 265 LT and MPM AP screen printers in our SuZhou factory and have the following in stock f
