Electronics Forum | Wed May 16 17:54:31 EDT 2007 | johnwnz
why not use your std profiler that you use for your ovens? if you want real time then hook it up to the PC running the ersa or stick the software on the laptop. If you suspect that your profile is drifting you need to get yourself a good repeatable t
Electronics Forum | Fri May 11 09:51:52 EDT 2007 | rgduval
We use MyData direct up here in the New England. Always seemed easiest to me. In a previous life, I did use an independent contractor. She used to work at MyData and serviced my machines in an even more previous life. Then branched out on her own
Electronics Forum | Tue Jun 05 10:01:47 EDT 2007 | bartlozie
the temperature difference between solder and room temperature, So if you let the solder cool down, you need less energy then holding it on temperature + heating a bit up. 2. If you let the solder get to solid, you don't have oxidation. 3. If you l
Electronics Forum | Tue May 29 13:15:13 EDT 2007 | brulal1
Hi everyone you are upgrading our line, we already have and MSR HD 15 from Panasonic, we want to add and Advantis AX-72 form Universal. Panapro sotware don't have the option for the Advantis Ax72, so for now we have to used both software Panapro to g
Electronics Forum | Tue Jun 05 14:04:11 EDT 2007 | hussman
We have the same situation here. But generally it is the customer gives us a 1-up Gerber drawing and we need a multi-up or some form of breakaway to make the product. The way we achieve this is thru a Word document we call PCB Guidelines. We attac
Electronics Forum | Tue Jun 26 10:41:32 EDT 2007 | slthomas
We had a cooler fail once, before we had any SMT. Auto-insert was at the far end of the building, at the end of the compressed air line. When the Unimod (dip inserter) sprayed the operator with water when the pneumatic table rotation motor fired up
Electronics Forum | Fri Sep 07 09:13:21 EDT 2007 | smtirl
Folks, we've recently upgraded to Heller MKIII reflow ovens with Gen 9 cooling units. We're running N2 atmosphere at 1000ppm O2 and Kester256 solder paste. We're seeing a big problem with flux residues building up in the cooling section of the
Electronics Forum | Tue Sep 18 18:03:52 EDT 2007 | fnorradd
Thanks for all of the informations guys, after spending some time rechecking the set ups and checking for worn components in case there was something i missed, i then took some time whilst an operator ran the machine to watch. Whilst doing this i no
Electronics Forum | Mon Sep 17 11:07:45 EDT 2007 | floydf
We had the mother board in a Samsung CP40 stop booting up. We have since fixed that (reseated the cpu). I tried putting a pc in place of the mother board. I loaded the program, and plugged the bus line that commuinicates to the machine in the pci slo
Electronics Forum | Mon Sep 24 10:16:36 EDT 2007 | chef
Depending on my customers needs there are functional test requirements for PCA's and mechanical assemblies. Soem of my customers have developed and provided dedicated functional test beds. Others are not to sophisticated and expect the unit to power
