Electronics Forum | Thu Aug 29 11:56:21 EDT 2013 | kdc45
Sent program to a CP43 and the part data was not recognized. Machine message to power down and back up, so we did so. On power up, screen appeared with the following: OS Error Err Code 0001 Err task 0028 Err para FFFF Ex stat 0151 Err adrs CC400000
Electronics Forum | Wed Jul 11 13:55:26 EDT 2007 | bschreiber
We have received several e-mails and phone calls regarding the Permali recommendation of cleaning Durostone pallets so I thought I would address these questions on the forum for everyone's benefit. Q: Can 440-R SMT Detergent be used for manual clean
Electronics Forum | Mon Feb 28 03:46:34 EST 2000 | Hany
Hello 1-In our facility we face a lot of power failures due to the to the city electricity network problems.So, it has hppend many times to loose some PCA's inside the reflow oven. Of course it costs a big money to buy a UPS for a reflow oven. One
Electronics Forum | Mon Feb 28 03:46:34 EST 2000 | Hany
Hello 1-In our facility we face a lot of power failures due to the to the city electricity network problems.So, it has hppend many times to loose some PCA's inside the reflow oven. Of course it costs a big money to buy a UPS for a reflow oven. One
Electronics Forum | Mon Dec 01 14:40:54 EST 2008 | snaggletooth
DC powered Power-up and ageing burn-in equipment, preferably non-product specific, starting from room temperature down to -41 degrees celcius and up to +71 celcius at a rate of 7 celcius per minute. But anyone who could suggest a manufacturer would b
Electronics Forum | Fri Apr 10 18:51:39 EDT 2009 | boardhouse
Hi Jeff, Your board supplier could be correct in this way. The board could have had just a hair left of copper on the circuit, which would hold up under the electrical test process, but once you powered it up, then there was enough juice to burn th
Electronics Forum | Thu Feb 06 12:32:24 EST 2014 | gnus
Hi all, During our last production run, our MyData TP9 machine shut down on its own mid assembly. Screen went blank. I turned off the power switch and waited 10mins before trying to power it up again. I turn the switch on and hear the fan turning on
Electronics Forum | Wed Apr 08 14:41:35 EDT 2015 | kevinb
I have a Quad QSV-1. When I was teaching the fiducials, an error came up on the screen. ABNORMAL PROGRAM TERMINATION came up. It might have read something different but this was close. It then closed out of the quad program and went to the window
Electronics Forum | Thu Jun 23 17:08:55 EDT 2005 | jdengler
James, Take all of this good information that's been given to you. Develope a plan that will reduce set-up time. Present it to the "powers that be". If they do nothing it's not your problem anymore. In most cases to make a large gain in productiv
Electronics Forum | Wed Jul 15 20:04:13 EDT 2009 | tonybb
We just bought an used Omron AOI machine and have no prior experience with it. We powered it up and found out that the machine failed to boot-up because there was no internal hard drive (C: drive). Apparently, it has two external hard drives connect