Electronics Forum | Thu Jun 22 10:22:28 EDT 2006 | PWH
I've done this stuff on UP3000's and AP's so hopefully my advice will help with your 2000... You can get into all upper level user modes, correct? You don't mention test, cal. or field service mode. If you can't get into those, I can send you a pr
Electronics Forum | Mon Oct 09 04:24:14 EDT 2006 | Rob
We had one of the crap UP3000's. However it was still better than a 265. If you don't need the extra large board size look for an AP2* or a HiE, especially if you are looking at using paste inspection.
Electronics Forum | Thu May 24 12:56:31 EDT 2007 | adlsmt
Im sure you will get some better responses but here is a start. We went from UP2000 to UP3000 Ultraflex about 2 years ago. The UP-2000 uses tooling nests and UP-3000 Ultraflex does not. Makes a huge difference in setup time. Up-3000 is BIG. I think t
Electronics Forum | Thu May 24 02:09:29 EDT 2007 | einat
I would like to learn more about the differences between the two. Which one do you recommend more and why? Also if someone can stand on the differences between: MPM UP 3000 HI E MPM UP 3000 MPM UP 2000 HI E MPM UP 2000 Any information would help!
Electronics Forum | Thu Oct 05 12:51:27 EDT 2006 | john_smith
cn, Currently we have a DEK265GSX a DEK Infinity and a MPM UP3000 printers and previously had MPM Accuflex,MPM UP1500 and MPM AP24s. No advice for the UP3030. We always had to work on all of the MPM printers for one thing or another and every time we
Electronics Forum | Fri Oct 06 14:54:30 EDT 2006 | Cmiller
I believe the early UP3000's had some significant mechanical issues. We have 3 UP3000 Ultraflex machines. We bought them used. These are great machines and easy to program but you need to have operators that really understand the machine. I dont thin
Electronics Forum | Mon Mar 05 15:59:39 EST 2007 | jasont
Have you considered used equipment? We have several options you may want to consider; - 1999 MPM UP 2000/A HiE + 2003 UIC HSP 4797L + 1999 UIC GSM2 - 1997 Panasonic SPPV + 1997 or 2000 Panasonic MV2F + 1996 MPA-3F - 1998 Dek 265 GSX + 2001 Siemen
Electronics Forum | Fri Jun 10 12:51:54 EDT 2016 | ttheis
Our company is looking to upgrade from a dek249 semi-auto printer to an automatic inline printer since we're doing some fine pitch packages which are tricky to line up, and we'll soon be tackling bga's for our products. We're looking on the used mark
Electronics Forum | Wed Sep 30 05:10:28 EDT 2015 | aemery
SWAG does make a good point. The tool he is talking about is located on setup page 1 in the vision box and is labeled FP Mode (Fine Pitch) mode. BY default the setting is "0" this means that once the machine is put into auto mode the camera or visio
Electronics Forum | Fri Oct 29 15:29:56 EDT 2004 | jasont
Hi Ran, Have you considered 2nd hand screen printers? We are an SMT equipment re-seller but also operate a subsidary CM factory in SuZhou, China . We use Dek 265 LT and MPM AP screen printers in our SuZhou factory and have the following in stock f