Electronics Forum | Mon Sep 02 15:20:48 EDT 2013 | aemery
Interesting! not the usual error. In my experience when the vision cables get damaged it shows up and white noise flashes across the monitor. The connections are the easiest to check so here's your system layout with connection points. Starting at
Electronics Forum | Wed Aug 07 14:51:31 EDT 2019 | alexeyzb
Hello! I used three SpeedPrint 210avi in our factory. They worked ok, but i had some problems: 1) Printer foil clamps. Steel thin blade which press PCB on table is connected to metal base by glue. As a result you need to change it every month, but af
Electronics Forum | Fri Jun 09 17:45:05 EDT 2006 | mika
We have some problem with the Pb-free SOIC's at the UIC GSM2 on the Flexjet head camera; (seem to remember this from before, but I can't find it on this forum). The Pb-free small SOIC:s are reflecting the light differently than leaded parts and are
Electronics Forum | Fri Dec 09 17:57:16 EST 2005 | mika
cameras > P2P (Part to Pad looking camera or upper looking camera) > front or rear >> select the corresponding camera that You have installed. After that: just save and follow the instructions on the screeen. By the way, an important thing is: You M
Electronics Forum | Mon Dec 12 14:05:45 EST 2005 | derengmao
I tried to use the Fixed Camera to inspect TSOP, however, I got either "UPPER SIDE END PIN ERROR", or "Missing Group:1". I have never had a parts getting recognized. I adjusted all parameter possible: Light, size, width, length. By using Dispaly Par
Electronics Forum | Wed Jun 17 01:02:16 EDT 2015 | armandogomez
Hello Had a similar problem way back with the hydra, first go to the service program manually activate the hydra camera then move the Xwagon to place the hydra ref plate over the hydra camera and check first if the camera works, second the image you
Electronics Forum | Wed Apr 25 15:50:06 EDT 2007 | Upper Management
Dear Ms. Chunks, Your valuable input has been noted. Unfortunately, your approach won't work in this case. Our customers would like for us to have AOI. To be perfectly honest with you, if we could just rig up some camera-looking thing that move
Electronics Forum | Wed Apr 25 15:54:59 EDT 2007 | Upper Management
Dear Ms. Chunks, Your valuable input has been noted. Unfortunately, your approach won't work in this case. Our customers would like for us to have AOI. To be perfectly honest with you, if we could just rig up some camera-looking thing that move
Electronics Forum | Wed Jan 16 14:13:42 EST 2008 | wayne123
Well I can't tell you what one is the best, But I can tell you what one we have and that I am not happy with, A.P.E is the company it is made by, we have the "chipmaster". They have several units avialable and from what I can tell they are all about
Electronics Forum | Wed Jun 17 14:34:22 EDT 2015 | rgduval
Thanks for the shot at it :) So, I discovered the "feeder teach" feature that UIC has in the software. It's fantastic...except it doesn't give the option to have the PTF deliver a part to the belt. That was mildly disappointing. In the help files