Electronics Forum | Thu Oct 11 00:11:49 EDT 2018 | mk15
I am looking for some help for where to look to fix this MY15E problem. We started the machine after the weekend and this error code comes. F-MOT-MSETDYN z/3: Upper end point outside limit. Any suggestions? Thanks
Electronics Forum | Fri Oct 12 11:16:46 EDT 2018 | tech1
Sounds like one of the Z stops is not functioning or needs to be adjusted.
Electronics Forum | Tue Oct 30 12:47:17 EDT 2018 | padawanlinuxero
hello try to calibrate the Z axis, check the cable must be damage, check if the transducer is loose, just some options from the top of my head, have you try getting into service and make it work there? if not try that too.
Electronics Forum | Mon Feb 26 20:02:42 EST 2001 | davef
First, I don�t understand why your board fabricator can�t do a good job plugging your vias. Additionally, when you consider that they forgot to plug the first batch of boards, it makes me wonder if they are desirable as a supplier. Generally, we us
Electronics Forum | Fri Sep 09 05:27:41 EDT 2016 | jasltd
Bud, hard to say without looking at bom / drawings & what manning you have avaiable to figure out what you need to put in place to get the build rate you need. is the cabinate supplied as is or do you have to build that as well? You'll need some ele
Electronics Forum | Mon Feb 12 08:28:34 EST 2018 | rcooley4
Justin, Thanks for your input! Those are all good things to consider and your input will help point me in the right direction! Thanks again! Ross
Electronics Forum | Tue Apr 05 05:19:30 EDT 2005 | blueflag
Breakdown help machine will not 0 set upper end point limits on Z axis Theta / lower end point missed Thanks Colin
Electronics Forum | Fri May 03 00:18:18 EDT 2002 | caldon
Gregp hit the nail on the head.Some of Quads Platforms were of the private label but Samsung and Mirea are no longer partners with Quad. Samsung and Mirae are independant now in the market. Machines made by Quad are stable.I do not know how Multitron
Electronics Forum | Wed Feb 15 16:10:13 EST 2006 | slthomas
My understanding is that you get a reading that's the average of all of the jumped points if you jump tc wires with conductive tape. If you're doing multiple parts on a board with varying masses and don't control the attachment method (i.e., how mu
Electronics Forum | Sun Sep 09 02:24:04 EDT 2012 | audere
More lube on the O-Rings caused lots of problems. Nozzles would drop downward at times. So I pulled everything out and started from scratch. Testing 3 new Z-Rods, 4 used Z-Rods in good shape (replaced the O-Rings) and around 20 nozzles - the proces
winsouce.jpg)