Electronics Forum | Tue Mar 01 21:21:25 EST 2016 | ttheis
I wrote it in c#.net using the aforge video dll. I used cheap usb pen cameras (endoscope camera) from ebay. I can send you the project if you want.
Electronics Forum | Tue Jul 02 10:27:31 EDT 2019 | BigFuji642
I tried using the cable on page 4. The DB9 to DB25. Is that the correct one to use with a USB to DB9 adapter? What is the difference between using MCS and C/C for communication? Which one should I be using and how do I see which one is being us
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
Electronics Forum | Wed Dec 06 12:48:54 EST 2006 | seth
usb mouse not detect, and can't install driver. Need instruction on how to install driver since it won't let me copy to C:/ drive.
Electronics Forum | Tue Jun 11 04:57:55 EDT 2019 | vinitverma
There is a difference between VIOS and VIOS TEXT. If you want to copy the program from one machine to another exactly, I would suggest you do VIOS. Just insert a floppy and perform "Make PCB Data Disk". This formats the disk in VIOS format. Next go t
Electronics Forum | Fri Nov 12 13:07:45 EST 2010 | G8reflow
Hi, The focal point of my research has been to recommend a reflow oven and develop a process for a small to low-medium production SMT soldering with the following considerations. - Lead-Free - Low to low-medium production - Forced Convection reflow
Electronics Forum | Tue Jun 13 09:40:36 EDT 2006 | grantp
Hi, Your right guys, and we turned off the chip wave, and most of the problem went away. It looks much better, and we are getting a slight bridging on a USB connector at the front edge of the PCB and a little adhesion, but not any where as much as w
Electronics Forum | Tue Mar 27 10:38:04 EDT 2007 | johansenng
Hi, sorry but i am new in this. This is a Freescale SRB ZigBee node schematic design. 1)Can anyone help me identify what is the use of the 10K ohm resistor (R115) used? Seems that there is some advantages and disadvantages of using it. The source is
| 1 |
winsouce.jpg)
.gif)
