Electronics Forum | Wed Mar 11 15:39:34 EST 1998 | ETS
For Sale: Full convection reflow oven, slightly used. 5 zone, 100" heated length, 200" overall. 40" cooling zone, edge rail conveyor, built in profiler. For information contact Brian Stumm @ 509-483-0900 or by e-mail.
Electronics Forum | Fri Jun 06 15:12:05 EDT 2008 | tomwho
Can anyone give me a contact for someone who sells used vitronic reflow oven parts. I am look for heater panels or heater wire for a vitronics smr-820 reflow oven,or some place that can replace the heater line in them. Thank you
Electronics Forum | Sat Jan 06 02:12:36 EST 2007 | backbenchers
i have 1 customer using our reflow oven, he is facing the problem that after taking the boards from reflow oven ICs & some resistors felt down.they are using our glue dispenser also, the glue is not fixed with the component. wht will be the solution
Electronics Forum | Fri Mar 15 15:34:37 EDT 2013 | anvil1021
In my experience used reflow ovens have been problematic. There are lots of adequate or better reflow systems out there that wont break the bank too badly....the N2 question, if you are going to be using solder that requires higher reflow temp than d
Electronics Forum | Tue Feb 22 16:28:22 EST 2005 | Indy
Hi, Could anyone direct me Or let me know of a 5 zone (Used/Pre-owned) reflow oven that I could purchase. Thanks in advance cheers Indy
Electronics Forum | Thu Mar 28 20:40:35 EDT 2019 | sarason
I built myself a reflow oven using an off the shelf 29l fan forced oven with digital controls. I then fully insulated the cavity around it with kiln fibreglass, and added a metal infill at the back as the back of the oven was just a metal sheet. Anyw
Electronics Forum | Wed Feb 23 17:39:11 EST 2005 | Austinj
I am most familiar with Heller (10 yrs. of 1088 4 zone - 1800 8 zone ovens) and find them to be very reliable. Other Manufacturers may have five zone ovens on the used market. (I used Petlock as an example because you could get data sheets/specs from
Electronics Forum | Fri Mar 29 15:43:26 EDT 2019 | tjs1634
We handle a similar SMTA quantity in house and use a 5 zone SMTmax AE-F530C 220V Single Phase Equipment Outline Size L-2000* W-612* H1220 mm Heat Zone Length 1000mm Equipment Weight 180kg Max power 7kW Belt Width 300 mm PCB Size 280x280 mm Comp
Electronics Forum | Tue Oct 27 22:48:48 EDT 2009 | fulldrawmike
Have 8" metal exhaust going out the oven to the > roof and no filter or flow meter. Have used a > filter and flow meter before, anyone have any > info on this or where to purchase the needed > items? > > Thanx, Todd McMaster Carr has just abo
Electronics Forum | Thu Mar 21 13:23:15 EDT 2013 | cyber_wolf
Stay away from used Nitrogen ovens unless you have a specific need for it. The flux management is a pain in the arse to clean. I don't care how simple they claim it is.
.gif)
