Electronics Forum | Thu Jan 22 13:01:14 EST 2015 | dyoungquist
We are using a nitrogen generator (with a N2 storage tank) that feeds 1 selective solder machine. I do not know which type of generator it is. The N2 generator has an oxygen analyzer on it. The selective solder manufacturer recommends a N2 purity
Electronics Forum | Thu Jan 22 10:21:46 EST 2015 | charliedci
I am curious to know how others are providing N2 for their lead free selective soldering process. If you are utilizing a nitrogen generator, is it a PSA type or Membrane type? I am trying to get a handle on nitrogen purity and what purity is necessar
Electronics Forum | Fri Jan 23 10:31:01 EST 2015 | rgduval
What are the continuing costs on the N2 generator? Is there replaceable media that needs to be monitored/replaced at regular intervals to maintain N2 generation? We're currently using tank-supplied N2, but are just getting ready to fire up our sele
Electronics Forum | Sat Jan 24 02:10:42 EST 2015 | comatose
Liquid is significantly cheaper than compressed gas tanks if you are in continuous production. Of course, it will eat your lunch if you're running things for a few days, then the machine sits idle for two weeks. It boils off whether you use it or n
Electronics Forum | Fri Jan 23 11:27:45 EST 2015 | charliedci
Per our selective solder provider, they recommend a PSA type generator to supply the needed 99.999% pure N2. The membrane type (which we have) does not provide the minimum (99.995%) purity necessary for lead free wave soldering. They happen to sell P
Electronics Forum | Fri Jan 23 12:34:28 EST 2015 | dyoungquist
Our nitrogen generator and an air drying unit came with the selective solder machine when it was purchased new in 2008 as a package deal. We originally were feeding the system with air that was not properly dried. That lead to some maintenance cost
Electronics Forum | Fri Jan 23 16:11:38 EST 2015 | rgduval
Charlie, For the 300 cylinder (the largest Airgas sells), it's going to cost about $66/cylinder for the gas (plus delivery charges). They also charge a $99/year lease for the cylinder. Based on those costs, and a low-end N2 generator system that I
Electronics Forum | Fri Jan 14 16:55:31 EST 2011 | tombstonesmt
On our Pilarhouse Jade we use nitrogen to cool the belt that drives our solder pump as well as keep the amount of oxygen to a minimum in our solder pot to reduce dross.
Electronics Forum | Mon Nov 10 08:53:23 EST 2014 | jpal
We have the opportunity to buy a new selective solder machine and are used to using a very old Jade machine with a moving tank and wetted nozzle. I have two process concept questions: Which is better- move the board over the nozzle or move the nozz
Electronics Forum | Fri Nov 14 10:40:35 EST 2014 | eniac
I use a two machines from EBSO, Germany. It's a machines with PCB carrier, so, solder pot is fixed. I'm fully satisfied with this equipment, but I use only wettable nozzles. If you would like to buy a new machine, not in used condition, EBSO will be