Electronics Forum | Tue Jan 30 20:38:32 EST 2007 | davef
NASA Internal Advisory: NASA-Issued Return to Flight Wristbands Contaminated with Silicone [snip] 10. PROBLEM DESCRIPTION: Recently we have been made aware of a silicone problem associated with the "Return to Flight" wristbands. These wristbands are
Electronics Forum | Thu Feb 25 07:37:42 EST 2010 | pcbrown
We are using Humiseal 1B31 and polyester dots for masking. We are spraying this in a Binks sprayer mixed at almost 1:1 with 521 thinner. Whe are seeing the coating creating thin halos around the poly dots as if the dots are "rejecting" the coating. T
Electronics Forum | Thu Dec 03 07:37:44 EST 2009 | duso02
The quality of the brush is most important. We use artist brushes from Torrington Brush Works. Sable works best but are the most expensive. We use more camel hair. They work best for us as we "hand coat" hundreds of boards a week and go through many
Electronics Forum | Tue Feb 19 11:28:29 EST 2013 | pbarton
We use a number of conformal coating materials. When you say you think you want to use a UV material do you mean UV cure, or just material with a UV trace for inspection purposes? For selecting appropriate materials take a look at IPC-HDBK-830. Keep
Electronics Forum | Mon Jul 20 15:53:10 EDT 2020 | robl
Tape test to check adhesion and multiple point thickness test - each board has 5 points per side documented for thickness testing & we measure pre & post coating thickness with an electronic meter. Also temp & humidty are also logged, and alarms go o
Electronics Forum | Thu Jan 30 15:41:52 EST 2003 | MikeF
The easy part is to determine which parts should be coated. The harder part is making sure the parts that should not be coated do not get coated. I don't even want to think about the amount of labor and materials I've lost due to conformal coat get
Electronics Forum | Thu Jun 05 05:27:13 EDT 2008 | andy1975
Hi, I've been looking into UV cureable conformal coating and the UV ovens but a chemist I know is very negative about this. He suggest by heating standard conformal coating to 90deg for a couple of minutes will make the product good enough to handle
Electronics Forum | Mon Jun 09 17:39:06 EDT 2008 | jlawson
Shadow cure effects are dealt with by post cure mechanisims. New UV Coatings should have one, either heat or moisture cure. Basically UV primary cure starts off cure process, allows handling of the products. But UV is not suitable for all products
Electronics Forum | Fri Jun 06 03:30:11 EDT 2008 | lococost
What about shadow effects? How do you cure UV coat under components?
Electronics Forum | Fri Jul 10 14:29:58 EDT 2020 | SMTA-64315913
Can you share some information relative to these questions about your conformal coating process: 1) What process controls do you use for conformal coating? 2) Do you perform manual conformal coating inspection? 3) Do you use AOI for inspecting confor
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
