Electronics Forum | Fri Jun 06 08:38:29 EDT 2008 | davef
Shadowing is a concern in uV coatings and adhesives. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=52734
Electronics Forum | Thu Jul 02 02:47:10 EDT 1998 | Graham Naisbitt
Wayne, We make such equipment both as batch and in-line systems, IR, UV curing as required. We have over 1000 systems installed worldwide. Are ISO9002 qualified. If you can let me have your address, I will get you more info. Maybe you could elaborate
Electronics Forum | Mon Jul 13 11:21:52 EDT 2020 | dontfeedphils
1) Viscosity measurement of the coating prior to spray, spraying and charting metal coupons for sprayed and cured thickness of the coating at various points of the conformal coat run 2) Yes, manual inspection 3) No, it wasn't able to inspect with t
Electronics Forum | Tue Feb 19 08:08:29 EST 2013 | williamaxler
My company is starting to look into Conformal Coating Equipment. From preliminary talks it sounds like we would like to use a UV material. I have a few question I was hoping as a group you all would be able to pass along some insight. 1. Do any of
Electronics Forum | Mon Jan 29 11:52:55 EST 2001 | blnorman
We have been using a VOC-free, no-clean flux on our boards that we conformally coat with no problems. We're using both a UV cured and a heat cured Silicone conformal coating. One thing to beware of is inhibition in the silicone. We found that out t
Electronics Forum | Mon Jun 15 09:59:42 EDT 2009 | kris1128
Hi Hoss67, I have had really good luck with PVA (Precision Valve and Automation) as Dave had mentioned also. Good pricing on all types of systems and good design crew for special applications. They also provide UV curing systems if needed. Hope it
Electronics Forum | Thu Jun 10 21:09:17 EDT 1999 | Samuel F.
Humiseal probably won't work as most of them are solvent based or require pretty high temp cures. MicroCoat technologies manufacturers UV cure epoxy conformal coating materials that have been used to coat just about anythin (except the green fog) Cal
Electronics Forum | Wed Jun 17 16:54:07 EDT 2009 | jlawson
I am rep for SCS and can state.... Another system provider is SCS (Specialty Coating systems) Precision Coat Systems. Have a stable robust XYZ platform, standalone, inline configuration, Spray + Dispense and can offer Ultrasonic Nozzle Options if re
Electronics Forum | Tue Jul 07 14:17:38 EDT 1998 | ETS, Inc
Dear Wayne, ETS is a manufacturer of conveyorized curing ovens for use with conformal coatings. We also happen to be the manufacuturer of the Nordson Ovens which are often integrated into the Select Coat and Century conformal coat lines. I would be h
Electronics Forum | Wed Jul 24 09:50:20 EDT 2019 | amitthepcbguy
To perform conformal coating of PCBs in high power electronics applications follow IPC-A-600F and IPC-CC-830B conformal coating standards. This standard enlists several performance criteria. Additionally, this standard is considered as a good referen
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936