Electronics Forum | Sat Feb 23 14:49:11 EST 2013 | duso02
Too bad you couldn't make it to the APEX show. Lots of equipment, and coating experts on hand. To answer your questions: 1. Yes, multiple brands, as well as non-UV cure. 2. Yes, there are. What you choose really depends on a lot of other info. 3. Ye
Electronics Forum | Thu Oct 06 10:57:52 EDT 2005 | SuMoTe
Put a known thickness gage next to your boards to be coated. Then coat it in the same pass as your boards. Measure the "new" thickness of your gage and subtract the difference. That will be your coating thickness. This is assuming your coating your o
Electronics Forum | Fri Mar 27 18:19:28 EDT 2009 | blnorman
We use paper labels with a protective coating to prevent browning during reflow. We've had no problems coating over these labels with our silicone. If your coating is not silicone, a Sharpie should print on the coating.
Electronics Forum | Tue Mar 04 10:42:45 EST 2008 | operator
We have a product that requires labeling and serial numbers that obviousely should be put on prior to conformal coating. 1.What kind of labels/ink/sharpe can be used under conformal coating without disolving etc...? We will be using Techspray 2103-1
Electronics Forum | Wed Jul 22 15:35:44 EDT 1998 | Katy H
Check out Precision Valve & Automation Latham, NY Phone: 518-782-3436 They make a relatively inexpensive system for applying material. You can choose spray or valve dispensing or both. The product is built simply and has been relatively easy to set
Electronics Forum | Wed Jun 03 12:02:42 EDT 2009 | joeherz
Greetings, We have a potential job coming up that would require coating with a silicone material (Humiseal 1C51 or equivalent). The volume will be high (in the 1000s/day). This is a low complexity, small card about 2.5" square in a 6up array. Onl
Electronics Forum | Sat Apr 04 15:38:10 EST 1998 | Sam Forman, MicroCoat Technologies
| I will be starting a conformal coating process soon, I am looking for any pointers on | 1) Best method for masking components, tape mask, liqued mask | 2) Which is best Spray or Dip? | 3) Compatiblity with no clean solder paste (flux residue) |
Electronics Forum | Tue Jan 10 22:10:29 EST 2012 | doncattoni
Hello Austin, Sorry for the delayed response. There are different types of cures for conformal coating such as RTV which stands for Room Temperature Vulcanising which means they are cured by the humidity in the air. This type of cure does not need
Electronics Forum | Fri Aug 07 16:40:31 EDT 2020 | duso02
There is too much variation in the different Conformal Coating types and application requirements that you will get many different answers. Your controls will be tailored to the job requirements. My controls for parylene coating aerospace product is
Electronics Forum | Thu Oct 06 08:30:32 EDT 2005 | jdumont
What is the best/most economical way to check the thickness of conformal coating after being processed. Would a standard height gage do? Thanks in advance...
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
