Electronics Forum | Mon Mar 21 09:18:02 EST 2005 | sforman1
As a manufacturer of acrylic and epoxy UV cure coatings and adhesives, MicroCoat Technologies reccommends Precision Valve and Automation in Halfmoon, NY
Electronics Forum | Fri Jul 01 20:12:16 EDT 2005 | Tom B
Steve, We use that Circuit Works pen as well! You can purchase a UV cure then download it to an opaque syringe or bottle. Use a small EFD or similar luer lock tip and dispense where needed. Tom
Electronics Forum | Fri Jun 06 08:38:29 EDT 2008 | davef
Shadowing is a concern in uV coatings and adhesives. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=52734
Electronics Forum | Fri Apr 17 14:08:00 EDT 2015 | davef
Humiseal says, "UV cure – These materials are also more difficult to repair as they are the most chemically resistant and mechanically tough of all conformal coatings. Removal is possible locally by using powder abrasion."
Electronics Forum | Mon Oct 05 01:20:46 EDT 2020 | SMTA-64386317
No pre heat the board and only apply at 2 sided of component. Yes, there is bleeding but as long did not covered nearby component is acceptable. We are using UV oven for curing.
Electronics Forum | Mon Aug 21 19:38:33 EDT 2000 | Dave F
Eric: I�ll pass on the uV and ammonia, also. Thoughts are: 1 You�re correct that the temperature/humidity mix can be a big driver to latex peelable solder mask cure time, but don�t overlook material thickness. Dispensers put material in a very th
Electronics Forum | Mon Jan 29 11:52:55 EST 2001 | blnorman
We have been using a VOC-free, no-clean flux on our boards that we conformally coat with no problems. We're using both a UV cured and a heat cured Silicone conformal coating. One thing to beware of is inhibition in the silicone. We found that out t
Electronics Forum | Fri Mar 06 19:19:54 EST 1998 | Pat
Just recently tryed Miller Stephenson MS-465 spray, worked well. Also using Loctite 5290. The MS-465 air dried in about 15 min. The loctite requires ultra violet curing which took about 50 seconds, but didn't cure completely. The loctite will also
Electronics Forum | Tue Jul 28 10:59:07 EDT 1998 | Jose Moreno
| Dear sirs, | please help me to fing a company whicjh produces white or yellow adhesive UV curing glue for SMT components assembly ,i need names and contact fones and faxes for those company ,i need any company but not Alphametal or heraues | th
Electronics Forum | Tue Jul 28 10:55:54 EDT 1998 | Jose Moreno
| Dear sirs, | please help me to fing a company whicjh produces white or yellow adhesive UV curing glue for SMT components assembly ,i need names and contact fones and faxes for those company ,i need any company but not Alphametal or heraues | th