Electronics Forum | Tue Feb 05 18:26:34 EST 2008 | janz
Hello, We have FCM base 2 machine (Philips-Assembelon). I am trying to find out whether it is possible to install instead vacuum pump (make noise and power consumption) venturi system. Does anyone try to do this.? What was the result.? What vent
Electronics Forum | Mon Jan 29 13:06:48 EST 2024 | erikfriesen
A follow up, using an external vacuum pump works fine, and reduces load on the air compresssor, probably using 1/3 of the air.
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Tue Oct 22 20:32:16 EDT 2024 | jamesatqkits
I also use a small vacuum pump, this allows me to run a small compressor to supply air to the machine, around 7.5cfm. Someone suggested it to me years ago, the venturi system in the machine uses a lot of air and is noisy. The pump is a yellow jacket
Electronics Forum | Fri May 14 16:49:17 EDT 2021 | winston_one
Agree with WiIIR and also can recommend to play with vaccum pump RPM . Slower vacuum increasing have help me to resolve one problem caused by the vacuum (it was solder splash from BGA balls, but the reason can be similar to your case). Also check i
Electronics Forum | Wed Sep 10 14:44:27 EDT 2014 | cyber_wolf
The machine has a vacuum pump in it.
Electronics Forum | Thu Sep 11 03:33:22 EDT 2014 | fnorradd
The machine has a vacuum pump in it. This is what I expected also, but the machine does not have a Vac pump on it. The unit is sealed by Dage, the unit is a crystal type vacuum tube not a filament type. Regards. Darron
Electronics Forum | Wed Sep 12 15:00:53 EDT 2007 | cyber_wolf
Never did the Linescan upgrade. Incidentally I recently needed to rebuild a vacuum pump. Pump rebuild kit consist of a coupling a couple rubber mounts and the membranes. Cost 495.00
Electronics Forum | Mon Nov 10 14:26:16 EST 2008 | slthomas
It'll just transfer the load to your compressor, and who knows how efficient your venturi pump (which can also be noisy) will be (IOW, how much load it puts on your compressor is anyone's guess)? I'd just replace or rebuild the vacuum pump, person
Electronics Forum | Fri Mar 24 11:28:10 EDT 2023 | cyber_wolf
We replaced at least 4 Hydra heads, 3 midas heads, vacuum pumps, line scan cameras under warranty back in the day. I have worked with Juki 2060 and 3010 series. Whomever is telling you they are bad machines doesn't know.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
winsouce.jpg)
