Electronics Forum | Tue Feb 05 18:26:34 EST 2008 | janz
Hello, We have FCM base 2 machine (Philips-Assembelon). I am trying to find out whether it is possible to install instead vacuum pump (make noise and power consumption) venturi system. Does anyone try to do this.? What was the result.? What vent
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Mon Jan 29 13:06:48 EST 2024 | erikfriesen
A follow up, using an external vacuum pump works fine, and reduces load on the air compresssor, probably using 1/3 of the air.
Electronics Forum | Tue Oct 22 20:32:16 EDT 2024 | jamesatqkits
I also use a small vacuum pump, this allows me to run a small compressor to supply air to the machine, around 7.5cfm. Someone suggested it to me years ago, the venturi system in the machine uses a lot of air and is noisy. The pump is a yellow jacket
Electronics Forum | Thu Aug 20 02:14:16 EDT 2015 | armandogomez
Hello ! I am looking for a manufacturer for a eccentric screw pump, we have a Bartec equipment but that machine is pricey and we are looking for a low budget for some prototypes we have to do, and they have a epoxy encapsulation. Thanks
Electronics Forum | Fri May 14 16:49:17 EDT 2021 | winston_one
Agree with WiIIR and also can recommend to play with vaccum pump RPM . Slower vacuum increasing have help me to resolve one problem caused by the vacuum (it was solder splash from BGA balls, but the reason can be similar to your case). Also check i
Electronics Forum | Thu Sep 11 03:33:22 EDT 2014 | fnorradd
The machine has a vacuum pump in it. This is what I expected also, but the machine does not have a Vac pump on it. The unit is sealed by Dage, the unit is a crystal type vacuum tube not a filament type. Regards. Darron
Electronics Forum | Wed Sep 10 14:44:27 EDT 2014 | cyber_wolf
The machine has a vacuum pump in it.
Electronics Forum | Thu Jan 31 04:02:09 EST 2019 | sarason
Is it that you have some solder paste blocking your line or the head ?
Electronics Forum | Wed Feb 06 01:24:24 EST 2019 | mst3000
Thanks Ry-n. We will look into them.
winsouce.jpg)