Electronics Forum | Sat Mar 11 08:37:35 EST 2017 | tch
My company has had the same issue on our Versaflow 366 with SAC305, we tried ultrasonic cleaning and it worked for a shift and then was clogged again. We have had the machine for 3 years and we have had to replace the gassing rings twice so far. We a
Electronics Forum | Thu Nov 01 14:02:57 EDT 2012 | williamaxler
I have used the Versaflow 40/50 which is the model before the 3. The machine is a very good machine, the electro magnetic pumps work well and do not cause alot of dross.
Electronics Forum | Mon Apr 29 13:56:19 EDT 2013 | williamaxler
We have a Versaflow 40/50 and ours is setup like this. We have out nozzle test position set so that in the Z axis you are 3.8mm away from the pin. Used feeler gauge Then you can set your gradient per nozzle. Start with a number then do a wave offs
Electronics Forum | Wed Mar 28 11:27:32 EDT 2007 | jmelson
Hello, I was the guy asking about doorway size for a Philips CSM84. Well, we cut the doorway using the best info we could get, and managed to get the machine inside with only a few scratches on the paint! Still no door, hopefully the fabricator wil
| 1 |
