Electronics Forum | Thu Sep 05 21:31:36 EDT 2013 | nophsem
Hi: Our machine (QUAD 4C) has a CyberOptics laser 6604033; when initialize at HOME, z-rod descends and doesn't retracts, which makes me think that the laser is misaligned, here's a link to the video recording: http://www.youtube.com/watch?v=W9ma7Zsf
Electronics Forum | Fri Sep 06 05:09:13 EDT 2013 | bobpan
Mod code 69 in early firmware versions was laser align part size addition but in later versions is was laser intensity.....if its set to 0 try it at 250 and see what it does....if this doesnt work....set it back to 0. It seems that when you put somet
Electronics Forum | Fri Sep 06 10:27:42 EDT 2013 | nophsem
Hi bobpan! MOD CODE 69 is "Waffle Tray Handler Installed Flag" and default setting 0. That's what mode code quick reference table says (the reference table that I've to respect according to the previous owner). And it's different what manual says (M
Electronics Forum | Fri Sep 06 06:11:40 EDT 2013 | fnorradd
Hi All, We have purchased an Ersa Versaflow selective solder machine, and I am looking in to profiling upon the machine. We currently have a process for profiling our wave with a WaveRider system, this we use to gauge that the machine is set up cor
Electronics Forum | Fri Oct 04 16:08:28 EDT 2013 | hegemon
Same idea but simpler execution. Verify Solder pot temperature. Verify Temperature of Solder as it leaves the nozzle. Verify preheating gets your PWB up to 90C-120C prior to soldering. Check machine speed, verify 4 seconds contact with solder at
Electronics Forum | Mon Sep 09 11:18:23 EDT 2013 | shirjer
We have a Vansco system on our 2005 Alpine Coach motor home. We have an intermittent outage problem with the 12V lighter socket. I can plug something in, like the tire sensor monitor, or the GPS, and after I remove it, the outlet no longer works, n
Electronics Forum | Mon Sep 09 11:36:17 EDT 2013 | moussa
We have an unloader jot Automation : - NO:35036A-7.1 - code:J213-25.5/5 - SNO:10201646 0.4) The problem is that the PT control give an error message witch is : “No direct information is set! use the support tool to set the PT control area and PT
Electronics Forum | Tue Sep 10 10:17:18 EDT 2013 | gregp
Hi Reese, Thanks for the feedback. So you have a fair amount of assemblies that are new designs with 10% through hole parts. Are these parts inserted manually? What is the soldering process?...wave solder?...selective solder? Do these components
Electronics Forum | Sun Sep 15 03:29:58 EDT 2013 | sarason
I would be happy to add programing of the CS400 to my program PCBSynergy gregp. I have added about 80 SMT machine formats to the program to date. All built by reverse engineering. You only need to send me some example formats or better still your ori
Electronics Forum | Tue Sep 10 15:27:30 EDT 2013 | gbarb
I have a design that requires the PCBA to be potted. However I have a shrouded header on the board that I need access to. Is there a way to cover this header during the potting process and then removed the cover after the potting material has cured
.gif)
