Electronics Forum | Fri Oct 12 12:12:13 EDT 2018 | davidsmullins
We have some fairly standard 0.1" pitch, two row, shrouded, through hole headers soldered onto a thick backplane. There are tiny inspection holes along the bottom edge of the plastic body that allow an inspector to observe the top of the through hole
Electronics Forum | Fri Oct 12 16:01:23 EDT 2018 | davef
Feature||Class 1||Class 2||Class 3 Circular wetting of solder of the lead and plated hole barrel on the component side.||Not Specified||180 deg||270 deg Plated hole fill.||Not Specified||75%||75% Circular fillet and wetting of solder of the lead a
Electronics Forum | Wed Oct 17 12:05:08 EDT 2018 | charliedci
We had a selective solder installation tech raise the connector body off of the PCB slightly with a spacer to allow for a visual inspection to verify the process/profile. A few years back we invested in a large enclosure X-ray with a manipulator arm
Electronics Forum | Mon Jan 28 04:39:59 EST 2019 | kiransahu
For instance, do you require recognizability, booking, materials acquiring and taking care of, accounts, Client the board programming, BOM and ECN Control and so on. Do you have frameworks on the shop floor that handle a portion of the abovemention
Electronics Forum | Mon Oct 15 14:29:58 EDT 2018 | compit
I have an Emerald X machine (by Assembleon) with an LCS. I start production. The first PCB board runs to the end of the LCS (item 1). Each subsequent stop is BEFORE LCS (item 2) - I have to remove it manually. And so until the production reset - then
Electronics Forum | Fri Nov 02 19:34:19 EDT 2018 | sarason
I am assuming that your application is Automotive. The logic here is that the product has got to at least run for 8 years or more. The prebake removes any moisture that may creep into the product during the wait time. A little moisture combined with
Electronics Forum | Wed Jan 09 01:22:39 EST 2019 | kenneth0
Hi Simond, The baking process is likely to remove any moisture after the cleaning process. We wouldn't want any moisture trapped as this might cause delamination if the package is subject to subsequent heating/reflow process. Hence there's a staging
Electronics Forum | Sat Mar 02 19:32:36 EST 2019 | proy
I have been grinding the smt reels to reduce space and recently found a company who will take my scrap for repurposing not landfill. It is not easy to get this into a proper stream unless you have a truck load. We probably send them 300lbs at a time
Electronics Forum | Tue Oct 30 22:53:29 EDT 2018 | cirsol
Hi there, We're trying to track down any of the SiPlace S-27 P&P user/service/maintenance/repair manuals. We particularly need them for the S-27 machine right now to fix a fault, but I'd also be interested in a copy of the S-25 & F-5 manuals. Does
Electronics Forum | Thu Nov 01 08:33:34 EDT 2018 | robl
Hi, We are looking at updating our shopfloor batch tracking system to an individual serial number system. Usually we would develop in house but we're a bit tight on IT resource at the moment. Does anyone have any recommendations for easy to use of
