Electronics Forum | Fri Feb 08 15:00:05 EST 2019 | mattkehoe
We are very close to having the printer up and running but have hit a snag that we hope someone has seen and can offer a work around. The machine does not have the auto stencil wiper attachment parts in it. Did not matter before the hard drive crash
Electronics Forum | Tue Jan 22 20:39:04 EST 2019 | nikevoo1
Hello, The problem is with NXT head H04. So there are 4 nozzles that take elements and place them on the PCB.The problem is that it does not randomly place the already taken element on the PCB.The nozzle take element and going to place it, but does't
Electronics Forum | Fri Jan 25 08:54:33 EST 2019 | dfl
For the first time, I'm really looking at to the power transformer for the IV-C pick and place (the big big one, at the middle). As I understood, is this transformer converting the 220V to 127V? I realize that the camera monitor is 127V and the PC PS
Electronics Forum | Sat Jan 26 15:47:10 EST 2019 | dfl
I'm with an annoying problem with an IV-c. Almost all the time the Y-axis "stuck" when the machine is homing. The motor tries to move the axis but only make a sound. If I move the axis by hand it can complete the homing and then goes to the IDLE. So
Electronics Forum | Wed Jan 30 15:08:10 EST 2019 | dfl
MM, exchange the cards doesn't make any difference. The problem happens when the machine is moving from left to right. Right to left works all the time. bobpan, thanks, I completely missed this one. The default was 0 and now is set to 1. The build c
Electronics Forum | Tue Jan 29 08:21:50 EST 2019 | electronics101
Hi All, Can someone please help, I have a number of tall surface mount components that according to IPC 610 (8.2.2.3) are a fail due to the end termination not wetting at least 0.5mm + solder height. The components are very well soldered but the sol
Electronics Forum | Wed Jan 30 02:50:33 EST 2019 | electronics101
Hi Steve Thanks for coming back to me, you are correct IPC class 3 is required. We are getting great wetting onto the device but not as per IPC 3 with the wetting rising about 0.25mm. I am questioning whether it is actually possible with such a (re
Electronics Forum | Tue Jan 29 20:33:52 EST 2019 | deanm
First, you cannot measure capacitors once they are soldered onto the board. Second, why must you measure? Verify your machine set up by using intelligent feeders (if your machine has them) or a checklist, preferably by two people. If you cannot trus
Electronics Forum | Tue Jan 29 15:40:14 EST 2019 | SMTA-Drew
We're a small CM in Connecticut looking for recommendations on BOM management software. We're presently using Excel with a lot of Vlookup and Hlookups between individual BOMs and the master parts list. I'm not necessarily looking for anything too ful
Electronics Forum | Wed Jan 30 08:27:37 EST 2019 | mst3000
Hi there. We are facing an issue with the placing head of our SMT machine SIEMENS SIPLACE CF 2004 model where the vacuum reading is low (820 instead of 900). This is resulting in that the components are either falling off when the head moves onto the
