Electronics Forum | Thu Mar 15 18:18:36 EDT 2018 | maustin
Yep, checked the nozzle (that was my first port of call). Had a look at it under our microscope, and also swapped it out for another nozzle to be sure. The problem still exists. You can set the theta speed, but only to Fast, Medium or Slow. I've
Electronics Forum | Thu Mar 15 18:21:26 EDT 2018 | maustin
Cheers. I have a suspicion its an error with whatever part of the machine measures shaft rotation, but the grub screw thing is an easy one to check and eliminate. I'm only guessing from what I can see, but it looks like its setting the component at
Electronics Forum | Thu Mar 15 00:53:06 EDT 2018 | dpalombo
We are looking for a domestic contract assembler that has experience placing Zierick pins onto IMS boards. Specifically we need to place the A1, A2, A3 and A4 pins of any length. Information on the pins can be found here: http://www.zierick.com/pa
Electronics Forum | Sun Mar 18 20:15:06 EDT 2018 | stephenj37824
Thanks so much for the reply. I had looked at Juki but must have missed that model. I see what you are saying about the dispensing. I was looking at the Mycronic solder jet system the My700 I believe. I have watched a few videos detailing the pros an
Electronics Forum | Wed Mar 21 09:05:53 EDT 2018 | stephenj37824
We are doing 2D on the printer. I got what seems to be a great price on the AIMEX III. I haven't heard back from Yamaha and Juki has emailed but no call yet. Fuji has a service person 3 hrs south of our location so it doesn't seem extremely far. I wi
Electronics Forum | Wed Mar 21 13:39:11 EDT 2018 | tombstonesmt
I know this isn't a choice from what I'm reading, but we use to kill LED boards with an old Panasonic MSR. Our newer CM-602 and NPM could not beat the speed when you're talking about a max of 3 different part numbers; depending on binning. My .02 .
Electronics Forum | Tue Apr 10 02:40:55 EDT 2018 | rob
Hi Stephen, All good machines. Regarding placement speeds ignore what the manufacturers claim, it's utter crap. Start with the IPC9850 number (not perfect, but we have been known to hit it), but even better to make them demonstrate on one of your
Electronics Forum | Wed Apr 11 07:46:00 EDT 2018 | stephenj37824
You are probably right. The Aimex III handles a larger board was my biggest draw. I will check and make sure the NXT III comes in a dual gantry configuration. Finally heard back from Juki after I basically told them if I didn't hear back they were o
Electronics Forum | Mon May 14 18:39:13 EDT 2018 | stephenj37824
Well we have decided to go with the Panasonic NPM W2(WX at end of year)...... Really liking the Ekra screen printers. Looking at the Serio 4000 or X5 pro large. Any recommendations for boards 24x20+? Also looking at the btu 10 zone Air 125. Cycle tim
Electronics Forum | Tue Mar 20 04:40:15 EDT 2018 | rob
I've seen them down at 2 metres in the past, but usually only 4 zone. from memory Electrovert used to do a small 5 zone with pin chain - Infraflow 500 or something. To be fair, even small one line CEMs usually have a decent oven as you need to be a
.gif)
.gif)
