Electronics Forum | Mon Sep 26 14:53:37 EDT 2005 | jackoskie
We recently purchased a previously owned Amistar LaserPro 5530L Pick & Place machine. We need to locate any offline programming software that would have been included with this model machine when it was new as it was not included with our recent pur
Electronics Forum | Mon Sep 26 19:03:09 EDT 2005 | darby
If Amistar can't help try service@ipulse.co.jp I think you may struggle to get this sort of software for free. Tenryu has a history of using hard locks on their off-line software matched to the supplied floppy drive/ CD with serial # etc. Good Luck.
Electronics Forum | Mon Sep 26 16:48:32 EDT 2005 | PWH
Are you using masking? Conformal coat will de-wet (no pin holes usually, though) due to masking tape adjacent to affected areas if the tape glue chemistry isn't compatible with the conformal coat.
Electronics Forum | Tue Sep 27 11:46:02 EDT 2005 | jimby
surface tension of solder mask material on the board. Need to rough it up prior to board assembly. Use Silica (cabosil) and IPA mixture and rub
Electronics Forum | Tue Sep 27 12:04:35 EDT 2005 | Amol
Thank you patrick and jimb for you suggestions, will try them out and keep you posted. Amol
Electronics Forum | Fri Sep 30 11:00:14 EDT 2005 | Amol
i tried scrubbing the boards with xylene when they are hot from the bake, the the pockmarking seems to have almost disappeared! Amol
Electronics Forum | Tue Sep 27 04:21:20 EDT 2005 | Preethamk
What do you think will be the role of the software Industry in the AOI domain in Future?? What are the specifc technologies that will emerge out??
Electronics Forum | Tue Sep 27 17:25:12 EDT 2005 | scombs
Hi Jay, Have you used those methods before? The muffin tin is a good idea as long as you buy enough. Thanks
Electronics Forum | Wed Sep 28 13:26:36 EDT 2005 | Jay Brower
Yes, I've used the muffin tins. I drained a solder drag pot. Steve makes a good point about the drain valve. When I drain my pot, I will be scooping out the solder and filling my tins.
Electronics Forum | Wed Oct 05 07:56:12 EDT 2005 | davef
Sure, using the drain for the last portion, that's difficult to ladle-out, is fine. Be aware that the drain may not be as easy to close as you'd like.
