Electronics Forum | Thu Jan 13 19:39:57 EST 2022 | openindus
Nobody have any answer on this issue? We are really strugling with that since begining of this year.
Electronics Forum | Mon Jan 03 12:23:30 EST 2022 | vasu278
After calibration placement accuracy is improved but for 1st head accuracy is not improved and also my camera vision in crt display is also changed anyone can help me
Electronics Forum | Mon Jan 03 12:39:46 EST 2022 | vasu278
Is it necessary to set adjustment mode 2 during calibration but iam unable to change the setting after changing unable to save and the screen appears as shown in image below
Electronics Forum | Tue Jan 04 20:41:08 EST 2022 | jzrelcom
Just had the x motor repaired and the friction measurement went from ~17 to ~33
Electronics Forum | Wed Jan 05 17:09:35 EST 2022 | charliedci
Asking for feedback on stencil cleaning systems ultrasonic/IPA hands free type. Please personal experience only, no sales feedback. Thanks
Electronics Forum | Thu Jan 06 09:31:45 EST 2022 | hello112
Does anyone have the part number of the Y-axis belt for this model DEK HORIZON 03IX press?
Electronics Forum | Sat Jan 08 06:37:44 EST 2022 | jineshjpr
Hi, Noticed that MPN--MAL215099913E3 used in one of our assembly with 22mm component height. In General 15mm height is right to set height calibration (98 % of the parts will be covered with this height dimensions except specific Connectors, Transfor
Electronics Forum | Sun Jan 09 20:44:10 EST 2022 | davef
Most boards are fabricated with 1-ounce copper [34.79µm (micron/micrometer)]. Foil more commonly comes in at 33µm or less. Processing reduces this down to 30µm or thinner. Talk to your board fab about the specifics of your application
Electronics Forum | Tue Jan 11 11:38:25 EST 2022 | spoiltforchoice
Tool box with a marked home for every tool and adaptor, if its not in use its in its home, anyone caught with it on their desk because "I was using it yesterday" gets a slap. Some would call that LEAN methodology I believe.
Electronics Forum | Fri Jan 14 17:07:40 EST 2022 | cyber_wolf
We used to use a Dremel with a cutoff wheel. You can clean the cuts up with an X-acto.