Electronics Forum | Mon Feb 22 03:13:56 EST 2016 | sarason
Try PCBSynergy. It does VIOS, both versions, can read 10 CAD formats does the Philips CAD2CAD interchange format(*.CAD)doesn't work from Gerber files but does interface to Visualplace which does, which in turn interfaces to PCBSynergy. PCBSynergy is
Electronics Forum | Wed Jan 12 05:36:37 EST 2011 | vinitverma
We designed a fairly simple software called PROCAM to do exactly that! It takes 2 Gerber layers - Paste/Mask layer and the Silk layer. Within minutes you can extract all the centroids. PROCAM has a standard excel output with all the centroids, fiduci
Electronics Forum | Tue Sep 20 14:13:43 EDT 2005 | Rich
I use Cad2Cad v1.5 with Phillips Topaz. I don't know how much is differs, try this: Converting data to a Philips VIOS Text File format: 1. Open the pick and place data in Excel and format it to look like table 1. ** Make sure you delete the �mm�
Electronics Forum | Fri Apr 08 05:26:56 EDT 2011 | vinitverma
Hello, We offer a product called - PROCAM for this very application. PROCAM uses Gerber (274X) as input and extracts the centroid data for each component automatically. It exports the centroid to standard excel format (including board outline, circu
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
Electronics Forum | Thu Jun 09 07:25:56 EDT 2022 | sadalmelik
Hello. I would like to give some advice, I hope it will be useful. I recommend that you use the .ygx file format to work correctly with P-Tool. After all necessary manipulations, convert, if necessary, back to VIOS.
Electronics Forum | Tue Sep 23 19:07:17 EDT 2008 | smt_guy
Hi, here's my 2 cents sir: You need.. a) The Gerber Data and the BOM b) Extract the XY CAD from the GERBER and build what they call Centroid Data. Save this in text format. c) Use Cad2Cad to import the centroid data and save it as Philips VIOS txt
Electronics Forum | Sun Jul 10 13:24:48 EDT 2011 | sarason
I have finally updated my shareware SMT Machine program It reads Protel ( from Autotrax to Altium Designer) and spits out Yamaha/Philips UFOS, VIOS , Mydata, Fuji MCS2 CP642 CP732, Gencad 1.3, Philips, FCM, ACM, FTIP, Essemtec, Panasonic BM221 CM88,
Electronics Forum | Thu Aug 16 12:24:28 EDT 2007 | slthomas
We are using Cad2Cad to convert cad data to Philips VIOS text. The properties tab references a Package Dimensions file that can be used but I have no idea how that is generated or how it's formatted. It seems it would be worthwhile to generate one ma
Electronics Forum | Wed Feb 22 09:15:06 EST 2012 | sarason
I have done some revision work on the UFOS format. But in my research I found that the format has a bit of variation in it on my old YM6021 the component field has 6 digits and the later YM series it has 8, also does the designator comment crash your