Electronics Forum | Mon Mar 07 22:40:36 EST 2011 | sarason
I have written an SMT file generator available at http://users.tpg.com.au/sarason/index.html try the YM6021 generator output option, it is very similar to a CSM66 file. The YMxx series file is a little different in format. This should help your file
Electronics Forum | Fri Sep 26 09:47:34 EDT 2008 | kevslatvin
I hope this doesn't add any confusion. I save my data as a .csv file and bring that into Cad2cad. This is how I was shown to do it by Assembleon. To use .csv you have to set your file format on the format cad file tab(during import to Cad2cad) to Cha
Electronics Forum | Sun Feb 28 12:40:47 EST 2010 | jmelson
I'm in St. Louis, MO, US Midwest. I wrote my own CAm interface, and it works REALLY well. It is only about 2 pages of c code. Of course, it only translates from one CAD package's format to one P&P machine's format. That makes it much simpler to w
Electronics Forum | Wed Nov 20 15:03:27 EST 2019 | richardcargill
If you've formatted the pcmcia / CF card then it'll be blank and have no DOS or anything as it acts as the hard drive for the machine. A DOS diskette formatted with /S will boot from the floppy drive, then allowing software installation with the orig
Electronics Forum | Thu May 14 10:50:14 EDT 2009 | dnachristen
Hello, New to the site here. Have a few questions regarding Philips (Assembleon) Equipment and program transfer. We need the ability to transfer "Golden Programs" to and from the machines. I'm currently using AMS 2.0 with line control. I hooked up
Electronics Forum | Fri Jun 22 01:51:41 EDT 2007 | jmelson
&F(27).NO4=0 NO4 is for the prep head, which you probably don't have. So, it is zero to mean don't use the prep head. &F(27).DSPF=1 This is the "display flag", it apparently means this component slot in the file contains valid data for a real compon
Electronics Forum | Wed Aug 22 21:49:33 EDT 2007 | darby
Steve, I thought these were the same format as the CSM, or very close to it. If so, then your *.BRD file has MNT#, X, Y, R, Nozzle-Skip-Feeder#- LocalFid, Designator, Part. Get rid of the header down to MNT = In Excel parse the file so that you get
Electronics Forum | Fri Sep 19 06:02:34 EDT 2008 | jlawson
Not that trying to sell anything, but Valors new vPlan system is a scalable software that can read gerbers and other CAM/CAD formats, can extract component positions, add polarities prepare job with BOM import, verify CAD to BOM and generate Topax-X
Electronics Forum | Tue Sep 23 16:27:08 EDT 2008 | slthomas
You'll have to get the cad data from someone, format it so that cad2cad can read it, import it into cad2cad, let cad2cad do it's thing, and then export the results into the machine. This procedure was written by me for people that know a little alre
Electronics Forum | Thu Aug 23 04:17:10 EDT 2007 | hannua
In the VIOS file between lines &B.MNT and &B.OPT you will find the index number (in hexadecimal, four digits just in front of the reference designator in each line) into the component and feeder table. The feeder table entries are designated with &F
