Electronics Forum | Thu Sep 15 07:25:55 EDT 2005 | Base
Try to get hold of the Philips/Assembleon Cad2Cad program, it is (or was) free. You can import several (proprietary) file formats and centroid files and export it as VIOS text-files. All you need to do then on the machine is assign the correct compon
Electronics Forum | Wed May 22 06:05:28 EDT 2019 | sarason
UFOS is a much earlier format which has very truncated details over VIOS , so as an intermediate going from later formats such as the versions of VIOS you are suggesting, is probably not the best, or more succintly it sucks. Send me a copy of your in
Electronics Forum | Tue Sep 20 14:13:43 EDT 2005 | Rich
I use Cad2Cad v1.5 with Phillips Topaz. I don't know how much is differs, try this: Converting data to a Philips VIOS Text File format: 1. Open the pick and place data in Excel and format it to look like table 1. ** Make sure you delete the �mm�
Electronics Forum | Mon Oct 20 14:45:04 EDT 2008 | altonc
Does anyone know how to open this program without hardware key or any software can convert VIOS text to VIOS file for Philips X series
Electronics Forum | Thu Aug 30 08:43:46 EDT 2018 | sarason
You can try my program PCBSynergy which generates the VIOS formats from CAD files, or PCBCSV files. http://members.iinet.net.au/~sarason/ sarason
Electronics Forum | Wed May 22 14:13:02 EDT 2019 | compit
Is there any way to copy files in the VIOS format directly from the machine and upload them to another machine? It seems to me that all files are stored in one database :(
Electronics Forum | Tue Jun 11 04:57:55 EDT 2019 | vinitverma
There is a difference between VIOS and VIOS TEXT. If you want to copy the program from one machine to another exactly, I would suggest you do VIOS. Just insert a floppy and perform "Make PCB Data Disk". This formats the disk in VIOS format. Next go t
Electronics Forum | Wed Jan 12 05:36:37 EST 2011 | vinitverma
We designed a fairly simple software called PROCAM to do exactly that! It takes 2 Gerber layers - Paste/Mask layer and the Silk layer. Within minutes you can extract all the centroids. PROCAM has a standard excel output with all the centroids, fiduci
Electronics Forum | Mon Feb 22 03:13:56 EST 2016 | sarason
Try PCBSynergy. It does VIOS, both versions, can read 10 CAD formats does the Philips CAD2CAD interchange format(*.CAD)doesn't work from Gerber files but does interface to Visualplace which does, which in turn interfaces to PCBSynergy. PCBSynergy is
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
