Electronics Forum | Fri Dec 17 09:04:17 EST 2010 | wolverine
We have an older model CP40-LV that will start out the day with blurry and double vision, then after about twenty minutes of just idling, the vision slowly improved until the machine could find the board fiducials and do a passable placement job. Th
Electronics Forum | Thu Dec 09 14:10:42 EST 1999 | se
Fiducial recognition is based on finding the centroid of the gray scale density of the fiducial. Round fiducials are easier for the software to digest in most cases, but its more important what the camera sees. Gray scale or color contrast of the fi
Electronics Forum | Wed Jun 22 08:07:47 EDT 2005 | ??
If you are using vision to correct on the printer and you are using the fiducials....then......yes
Electronics Forum | Tue May 25 11:53:25 EDT 2004 | sajr
You can go into the vision diagnostics menu and create custom fiducial shapes. This is taught in the advanced programming school. I have done this in class but never used it since.
Electronics Forum | Thu Oct 28 00:01:55 EDT 2010 | emmanueldavid
XPS, Hope the information in the above thread may help to get You right. BTW, Local Fiducial Marks are meant for specific devices in the Circuit Cards & typically selected to overcome offset or precision placement issues faced from Global Fiducial
Electronics Forum | Fri May 14 07:06:47 EDT 2004 | stefwitt
None of the vision systems can really �read� a black object. In order to recognize an object a light source is required. The light is reflected from the object through an optical lens to the CCD chip. There is almost no light coming back from a black
Electronics Forum | Wed Oct 12 11:02:59 EDT 2016 | hken
I think stencil manufacturers back fill half etched fiducials with black epoxy or something. I know I've had some worn and that's what I've done for my vision systems to be happy again.
Electronics Forum | Wed Jun 02 03:32:09 EDT 2004 | Evtimov
It's obvious the problem is in the software. Because they tried to make it user friendly, you can't use the vision system at all. You only choose the type and everything else is done internal. that's why they missed some possibilites.I know mashines
Electronics Forum | Wed Jun 22 10:12:31 EDT 2005 | slthomas
I don't know how your printer could match the board's alignment to the stencil if they aren't. If you don't have fids on both board and stencil that match you'd have to use pads, but then you've got apertures thrown in to the mix. If that's the sit
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723