Electronics Forum | Tue May 24 05:25:17 EDT 2005 | Zsolt
We had similar problem, the root cause was that the cooling fans on the VME rack were not working and the vision card hangs up if the temperature is too high. Also check the power supplies, we had also a problem that the filter condensator inside the
Electronics Forum | Thu Feb 14 07:04:19 EST 2008 | daxman
I've never seen that message myself... an idea though.. if your IP3 has a 4400 vision card you'll have seperate LSO cards. The encoders plug directly into them. It could be related to the LSO cards. You could try swapping the LSO cards and see if th
Electronics Forum | Wed Aug 23 12:04:32 EDT 2006 | fastek
I am going to be scrapping out a 1997 IP-3E soon. It is a complete machine EXCEPT for the 4800 vision card. If there are cards you might need and don't feel like getting hosed by Fuji, let me know. Rick
Electronics Forum | Tue Mar 17 16:09:25 EDT 2009 | gregf912
For the IP3 to reliably place BGAs the machine needs the 4800 vision card and type 12 camera. From the problems i see here you must have the 4400 card and a type 8 or 9 camera. It would also seem that a calibration is in order. I have calibrated and
Electronics Forum | Fri Jun 24 01:01:41 EDT 2005 | FAC
If you are only concerned with the outline and it has 4 corners, VT-10 or 254 will work with backlighting. If the FIP3 machine has a 4400 card installed, frontlighting with high I/O counts could take a while during vision processing. If your machine
| 1 |
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
