Electronics Forum | Wed Apr 03 20:23:44 EDT 2024 | lremme
I tried to clone my cfi-128 flash memory card, but can't get it to boot. I am concerned because I have no backup if the original Flash card stops working. Does anybody have a flash card with Topaz-x VIOS and (MSDOS 6.2) preloaded? I would be looking
Electronics Forum | Tue Apr 02 19:21:57 EDT 2024 | lremme
I cloned the Flash Memory Card (CFI-128MDG ) for the Topaz-X (circa 1998). The contents looks identical to the orginal, but it will not boot the machine. Has anybody tried this and know what is wrong? (MSDOS 6.2 OS) thanks!
Electronics Forum | Wed May 08 10:21:05 EDT 2019 | compit
During the start the error "DOWNLOAD VISION ERROR" - instead of "OK" is "NG". - resolved - video card died. But I still have a motor overload error Y1 (L057:CUR.DEV ... Y1 error) - what resistanc
Electronics Forum | Thu Aug 13 19:54:01 EDT 2015 | aemery
The camera assembly is designated as X23; the stencil & board lighting as well as the camera video signal pass through the DB9 connector at the camera. There is a ribbon cable in the vision gantry tray that carries both to the box on the left side o
Electronics Forum | Wed Feb 06 02:05:17 EST 2013 | dman97
Does anyone know what causes a pink vision screen on a GSM-X running on OS/2? All the cameras turn on when run on a dry cycle but the vision monitor never turns on. It just shows a pink screen. I checked all the connections on the VME cards and ca
Electronics Forum | Thu May 23 12:27:19 EDT 2019 | weglimir
Hello I have problem with card: VPM-5238D - Namely when printer starts, and DEK program initializes, it hangs for a while on "Downloading vision system" and then following error appears: "Vision Hardware Error - FATAL ERROR - REINITALIZE MACHINE" "
Electronics Forum | Tue Feb 28 17:45:56 EST 2012 | acsscott
So, got the Topaz X up and running. It has (4)FNC nozzles on 2, 4, 6, 8, and (4)74A Nozzles on 1, 3, 5, 7. We are trying to optimize it to pick up 8 components, then move over the camera, then to the PCB and place them. In the Mount data, we load
Electronics Forum | Mon Jul 26 21:56:53 EDT 2004 | pdeuel
The camera is not driven from the motor cards. The camera is attached to what is called a forcer. For the Y axis there are two of them. One is wired backwards from the other. one of the forcers is connected to a flex chanell for the air and electrica
Electronics Forum | Mon Mar 05 22:33:31 EST 2012 | acsscott
We are trying to optimize it to pick up 8 components, then move over the camera, then to the PCB and place them. In the Mount data, we load heads 2, 4, 6, & 8 with a 3216 Resistor, then them next 4 components are LED's, and are loaded on heads 1, 3,
| 1 |
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
