Electronics Forum | Tue Dec 21 09:22:52 EST 2010 | cwhite30
I have a camalot 1818 dispensing system, but it recently stopped booting up. It gets to the 197 vision initialization screen and then freezes with the message "bad command or file name could not communicate with vp" Does anyone know how to fix this?
Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer
I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu
Electronics Forum | Wed Jan 05 14:53:59 EST 2011 | cwhite30
I got it working. The computer backup battery did indeed die. I obtained the bios settings from the manufacturer. Thanks
Electronics Forum | Thu Dec 24 12:43:18 EST 2020 | marcelorotofrance
Hi Bob. When I initialize the system, all functions appears. In "Utilities/Initialize System Comm" option too. I have to confirm yet, but this problem appears to not happen in all programs. The red error message shows when I launch the program. My su
Electronics Forum | Wed Dec 23 22:34:22 EST 2020 | bobpan
Hello Marcelo, When you initialize the system in central controller...does it see mvs? Will a different job that you ran before work or does the same error happen? When do you see this error. You can email me at http://www.precision-repairs.com if y
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Electronics Forum | Wed Aug 12 12:02:41 EDT 2015 | edwaterfall01
I think the heart beat message comes up if the vision had not initialized. You have changed that already stop I think it is something else. Have you some money a Restore of the Machine Configuration and Mapping and Calibration Data?
Electronics Forum | Tue Jan 09 14:41:55 EST 2018 | bsyeo
Hi All, Need some help on this. We have a strange problem with our Dek API. There is no camera vision but everything is able to initialize well. The vision works occassionally but most of the time it does not. We have checked the nextmove card, int
Electronics Forum | Wed Dec 07 11:58:36 EST 2005 | derengmao
Could you help to tell what is the way to pick/place 0402/0201 using QSA30? Also do you know that without a VME bus Control B/D (illumination card for fixed camera), the new version software (ver.6.0 and above) will not initialize the vision system.
Electronics Forum | Fri Feb 09 01:46:55 EST 2024 | erikfriesen
I have a 2005 DEK Horizon 02i, the cmos batt was dead, so I replaced, and reset the bios. The device hangs in initialization, eventually erroring out. The vision led's blink rapidly during this period. Also, the card shows an error in device manag
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
