Electronics Forum | Wed Jun 11 16:05:28 EDT 2003 | stepheno
We looked at some systems but didn't buy any. What we use is a little mirror. I believe Metron makes it. It is a small diamond shaped mirror with beveled sides and a handle. Used with a microscope, you can see a lot. They are around $100.00. Some
Electronics Forum | Thu Jun 12 12:30:44 EDT 2003 | caldon
Edmunds Optics has them http://www.edmundoptics.com/IOD/DisplayProduct.cfm?productid=2038 the link above is for a Prism. Works well. Continued search on the Edmunds site will get you a mirror if need be. Cal Communications Test Design, Inc www.CTD
Electronics Forum | Tue Jul 01 16:01:17 EDT 2003 | caldon
REX- Contact ACI 610-362-1200 x224. The contact person is Mr. Jeff Stong. They are cheap and will give you a report. www.aciusa.org jstong@aciusa.org There are some other labs that do this...but we use this one as it is close to us and they do a des
Electronics Forum | Thu Jun 19 10:47:29 EDT 2003 | Eric QE
Caltex or Ersa type system is good, Caltex prisms, necessary for looking underneath the BGA can be crashed easily when looking under low profile or Micros. $40-$110 each depending on the availability and who makes 'em. We have 2D and 3D X-ray avai
Electronics Forum | Fri Jun 20 13:04:37 EDT 2003 | Pete
Why all the fuss about BGA inspection?? If your reflow process is sound and your rework system is competent (i.e a PDR) they will be fine. Best advice I can offer is to srike a deal with an outside company who will inspect a small batch of your pro
Electronics Forum | Thu Jun 19 13:06:09 EDT 2003 | derelict
I am pretty happy with my Ersascope, they have been a little slow with software updates and with software questions that i have had. But my main reason that this has paid for itself is dealing with our non-local contract manufacturers, we have used t
Electronics Forum | Thu Jun 19 16:24:46 EDT 2003 | minimicro
I like you looked all over and was frustrated. The prices that they are asking, you would think that we were back in the 90s when money was all over the place. After looking around I found a BGA-100 from SMT Tools. This system will do everything
Electronics Forum | Thu Jun 19 16:58:11 EDT 2003 | blundell
We can speak from experience, the Ersascope needs only 1.5mm to see along side a device and is the only system that looks low enough, the cheaper systems may be fine for normal packages but forget it for csp's, micro BGA's Also its the only system th
Electronics Forum | Mon Jun 23 04:00:43 EDT 2003 | Paul Cooper
Hi there There are a number of things worth considering when viewing bga's. Firstly, like any other solder joint that you have been inspecting for years, suface finish is critical. Secondly, and again like other joints shape is important. Now it may
Electronics Forum | Tue Apr 09 21:40:26 EDT 2002 | ianchan
We are a local enterprise with limited resources, just like you described, so hope this experience sharing helps : we place a production Visual Mechanical Inspection (VMI) inspector at the end of each Reflow Oven area, complete with magnify scope 30
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936