Electronics Forum | Tue Jan 10 11:39:16 EST 2012 | cyber_wolf
Well it can only be one of two things. Flux residue from your paste or some type of out gassing from the boards you are running.
Electronics Forum | Tue Jan 10 13:51:32 EST 2012 | jdengler
Had you cleaned the inside of the machine just before this started? I once had an oven that was cleaned with some sort of oven cleaner and it contaminated PCB Assemblies when they ran it. This residue was not visible to the eye but caused soldering
Electronics Forum | Thu Feb 21 06:18:42 EST 2013 | cbeneat
We run 3 Vitronics XPM2's, our newest is 3 years, oldest is 6+ and I have not seen our rails warp the way you're describing. I would be plenty frustrated if I had to replace rails this often.
Electronics Forum | Mon Mar 11 08:07:58 EDT 2013 | emeto
I would check/replace the neighbour zones. If your temp isd higher than what you set is probably the cooling zone not working normal(fan replacement or cleaning). The problem might be caused by zone 11 too.
Electronics Forum | Tue Jun 03 10:30:36 EDT 2014 | cbeneat
We have the same ovens, our 2 sided boards have the same profile for both sides. Haven't seen a problem in 8 years.
Electronics Forum | Wed May 20 11:13:45 EDT 2015 | josealatorre
1. DEK 710 for Screen Printing 2. Fuji NXT for Pick and Place 3. Vitronics XPM3i Oven
Electronics Forum | Fri Jan 13 11:01:46 EST 2017 | emeto
Hello experts, We have a XPM3m reflow oven and for certain boards, the oven is the bottleneck. I am curious if someone knows how to increase the throughput by decreasing the distance between the boards in the oven. It has to be in the software somew
Electronics Forum | Wed Feb 14 15:49:30 EST 2018 | cbart
Did you check each leg alone to ensure you have proper incoming voltage to the machine on each individual line? any other 3 phase issues in the building? do you have a UPS for pc and conveyor purposes? is that failing?
Electronics Forum | Tue Aug 30 22:39:29 EDT 2011 | comatose
I'm looking at used reflow ovens. I'm homing in on Vitronics. We're pretty self-sufficient in terms of keeping machines going, but does anyone have experience with parts and documentation support for Vitronics? Is there a fee for getting into the sys
Electronics Forum | Tue Jul 16 07:55:46 EDT 2024 | ginny
> We're currently running a pair of XPM 820 > Vitronics reflow ovens with a year 2000 vintage. > I'm looking into either replacing both with used > or one at a time new (and using the 2nd for spare > parts). I priced a new delivere