Electronics Forum | Mon Aug 18 06:30:23 EDT 2014 | nhel_0009
Hi guys. Kindly help me on our reflow (vitronics soltec). My problem is the n2 value reach 10014...any possible solution or suggestion guys..
Electronics Forum | Mon Aug 18 06:35:44 EDT 2014 | nhel_0009
Hi guys. Kindly help me on our reflow (vitronics soltec). My problem is the n2 value reach 10014...any possible solution or suggestion guys..
Electronics Forum | Mon Sep 08 10:32:39 EDT 2014 | nhel_0009
Right sir we already fix it by loading configuration from other machine
Electronics Forum | Wed Apr 11 12:17:05 EDT 2018 | randywoods
I need to perform maintenance. On reflow oven. I do not remeber procedure for opening. Hood for reflow oven. Vitronis Soltec XPM2.
Electronics Forum | Mon Sep 08 09:11:30 EDT 2014 | jdenuzzia
We resolved this issue a few weeks ago. It was a configuration mismatch in the oven (MR933+)software with the onboard O2 analyzer.
Electronics Forum | Thu Apr 12 09:06:25 EDT 2018 | deanm
If its like our XPM3i there is a keyswitch on the right hand side of the console above the keyboard.
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
Electronics Forum | Mon Oct 19 05:16:56 EDT 2015 | florintoma
Hello all, I have a problem with the wave 6622c . The temperature of solder pot and preaheating zones 1 and 2 is not increasing. the strange thing is that the machine is not display no error. Can you help me with some advices?? regards
Electronics Forum | Mon Oct 19 09:59:30 EDT 2015 | cbeneat
I've never had that particular problem with our machine, but I do know that if the CB pop for whatever reason the machine doesn't give an error. So I would check those, if you haven't yet. Also under options you can do an element check, see if that
Electronics Forum | Tue Oct 20 10:14:59 EDT 2015 | aemery
Florin, Not sure if this will be helpful or not, but I have completed a couple of pot height retrofits for these waves and I seemed to remember that one of my clients spilled some solder and shorted out the 24vdc power supply. I am pretty sure this
.gif)
