Electronics Forum | Mon Aug 18 06:30:23 EDT 2014 | nhel_0009
Hi guys. Kindly help me on our reflow (vitronics soltec). My problem is the n2 value reach 10014...any possible solution or suggestion guys..
Electronics Forum | Mon Aug 18 06:35:44 EDT 2014 | nhel_0009
Hi guys. Kindly help me on our reflow (vitronics soltec). My problem is the n2 value reach 10014...any possible solution or suggestion guys..
Electronics Forum | Mon Sep 08 10:32:39 EDT 2014 | nhel_0009
Right sir we already fix it by loading configuration from other machine
Electronics Forum | Wed Apr 11 12:17:05 EDT 2018 | randywoods
I need to perform maintenance. On reflow oven. I do not remeber procedure for opening. Hood for reflow oven. Vitronis Soltec XPM2.
Electronics Forum | Mon Sep 08 09:11:30 EDT 2014 | jdenuzzia
We resolved this issue a few weeks ago. It was a configuration mismatch in the oven (MR933+)software with the onboard O2 analyzer.
Electronics Forum | Thu Apr 12 09:06:25 EDT 2018 | deanm
If its like our XPM3i there is a keyswitch on the right hand side of the console above the keyboard.
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
Electronics Forum | Mon Apr 09 09:39:40 EDT 2018 | justconmac
Having an issue with tracking for the Vitronics Soltec Delta 3. Wave will not give error on "expected PCB at exit" but will still show 1+ pcb's in the wave when the machine is empty. This is causing solder pump to idle unnecessarily. Outfeed sensor i
Electronics Forum | Fri Sep 14 08:53:43 EDT 2012 | mbnetto
Hi, Recently we acquired a Delta 3 and I noticed everytime we change any value regarding to the tracking system, as chip or main wave - offtime/ontime- with boards loaded on it, the tracking system doesnt work well. sometimes it turns off the wave o
Electronics Forum | Thu Jun 28 18:50:08 EDT 2018 | caurbach
We don't have your exact machine or know your exact configuration, but our machine has occasionally gotten an estop due to a breaker in the SelectX tripping. Just be aware that there are circuits other than the mushroom switches that can generate an
.gif)
winsouce.jpg)
