Electronics Forum | Wed Mar 23 12:10:04 EST 2005 | dphilbrick
Has anyone out there done any lead free testing using a Vitronics Unitherm 500 oven? based on the specs I have dug up on the machine I suspect it should work fine but it would be great to hear from someone that has done it. Thanks in advance.
Electronics Forum | Thu May 05 18:14:11 EDT 2005 | rtorres
Hello we are having a problem with an Unitherm 500 reflow oven from Vitronics. the conveyor is not responding to the system, the speed is out of control, it seems to be alerted. Does any one know what is going on. your help is greatly appreciated. Re
Electronics Forum | Mon Nov 11 08:36:09 EST 2013 | cbeneat
Try the letter s
Electronics Forum | Mon Nov 11 08:47:27 EST 2013 | aj
Hi Chris, Thanks but its not working. aj
Electronics Forum | Mon Nov 11 15:05:07 EST 2013 | cbeneat
Have you tried soltec? This is the default on our Delta wave.
Electronics Forum | Mon Nov 11 08:04:54 EST 2013 | aj
hi all, I need to access the service area on my reflow oven - Vitronics SMR500.. I have tried 2 , 3,4 but no luck. Anyone know the password - am in the process of contacting Vitronics themselves aswell.. aj
Electronics Forum | Fri May 13 18:17:33 EDT 2005 | pde
The encoder is a sealed encoder located on the down stream end of the oven. Call Vitronics / Soltec for tech support. There is a calibration procedure for adjusting the belt speed to compensate for loaded and un loaded conditions. Soltec can give you
Electronics Forum | Thu Oct 09 07:10:15 EDT 2008 | leeg
Anyone know of a company within the Uk that provides servicing/technical supoprt for a Vitronics Unitherm SMR-520-A?
Electronics Forum | Fri Dec 03 16:25:08 EST 2010 | adrnbntz
Having Trouble with an old SMR500 oven...appears that HDD fails...need to restore software but I do no have it vitronics does not suppor it any more... Any one can help me with software VCP...is in OS/2 Operative System. Regards.
Electronics Forum | Sat May 07 04:28:51 EDT 2005 | grayman
try checking the speed/conveyor driver,encoder,comunication I/O Board system and lastly the program. If the driver is at fault replaced it do not repair it. If software try to load it again but make back up.
