Electronics Forum | Fri Jan 12 11:46:26 EST 2018 | emeto
I don't know this exact oven, but usually it goes like that: First is a three phase power, then it is a contactor that is switching the power for the heaters and fans. than there are transformers for lower voltages. then there might be UPS system in
Electronics Forum | Thu Oct 28 20:13:39 EDT 2004 | grayman
The same with Russ, I would look at Vitronics and BTU. based on my experience they give best results especially on the profile. Maintenace is also superb! BTU has modular blower, heater T/C assy. Vitronics is "XPM - NO PM System" Now, BTU offers lif
Electronics Forum | Mon Sep 27 06:43:59 EDT 2021 | sophyluo1985
Some thoughts of GOLDLAND: We recommend that you choose Vitronics or Heller brands. They are the most popular machines in the world. According to the long-term plan, your equipment needs maintenance and replacement parts in the future, so their parts
Electronics Forum | Mon Mar 11 07:58:59 EDT 2013 | cyber_wolf
So I have this issue with my 1240. During my weekly oven surveyor check I get a software alarm that says I am out of tolerance. Probe #3 which is closest to the hinge side of the oven is approx. 10 degrees hotter in zone 12 than the other 2 probes o
Electronics Forum | Sat Feb 22 11:37:00 EST 2020 | kylehunter
Hey all, I've made a post in the past about us expanding to a new space, but I wanted to do a new post with specific questions. We currently have a DEK 265, Phillips Opal Xii, and a Heller 1500. Our main reason for expanding is to have a lead-free
Electronics Forum | Mon Jun 19 21:40:37 EDT 2000 | Dave F
Dave: Consider: Vitronics Soltec 2 Marin Way Stratham, NH 03885 888-473-3569 603-772-7778 Fax: 9340 www.vitronicsoltec.com info@us.vitronics-soltec.com
Electronics Forum | Mon Nov 11 08:04:54 EST 2013 | aj
hi all, I need to access the service area on my reflow oven - Vitronics SMR500.. I have tried 2 , 3,4 but no luck. Anyone know the password - am in the process of contacting Vitronics themselves aswell.. aj
Electronics Forum | Mon Mar 11 09:46:04 EDT 2013 | cyber_wolf
The surveyor is a a plate that I use to "survey" or verify the oven on a weekly basis. The data logger or profiler is the actual unit that follows the board through the oven to take readings. I don't think the zone thermo couple that measures temp a
Electronics Forum | Thu Jul 23 09:59:11 EDT 2009 | esolano
Hi all, Zone 11 on a XPM2-1240 does not want to heat up and would not stay at set point. Does anyone have any ideas how to solve this problem? Or if you know of a technician in the Southern California area that can perhaps fix this problem, please
Electronics Forum | Fri Jan 21 10:02:18 EST 2005 | Steve C.
We have 2 different wave machines. An Electrovert with a foam flux and a Vitronics with a spray flux that is no-clean. We started noticing on the Vitronics that we were flooding inside the wave fixture. After further review we noticed that the angle
