Electronics Forum | Thu Apr 22 01:15:36 EDT 2021 | bangir
Hi All, I am looking for part numbers vitronics XPM2-820. Anyone can share me the manual book/parts list? Thanks
Electronics Forum | Wed Apr 11 12:17:05 EDT 2018 | randywoods
I need to perform maintenance. On reflow oven. I do not remeber procedure for opening. Hood for reflow oven. Vitronis Soltec XPM2.
Electronics Forum | Thu Apr 12 09:06:25 EDT 2018 | deanm
If its like our XPM3i there is a keyswitch on the right hand side of the console above the keyboard.
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
Electronics Forum | Tue Jul 22 20:47:21 EDT 2008 | davef
Q1. Can I do this myself on site? A1. Sure. Most companies demoisturate their components in-house. Q2. Can we use our Vitronics Soltec XPM820 Reflow Oven? A2. You can. Most of us would be using an oven like that in our product processing. If you look
Electronics Forum | Fri Jan 12 09:22:51 EST 2018 | dskling
Hello We have a Vitronics XPM820 that has us stumped. We have replaced both power supplies (G1 and G2) and we still cannot clear this alarm. The A1 board has all 4 leds light for proper voltages. We have verified that we are getting the correct vo
Electronics Forum | Fri Feb 03 16:55:20 EST 2017 | westshoredesign
We have 6 Vitronics Soltec ovens. 4 XPM 820's, an XPM 1240, and an XPM3. All of them are great, but we're very impressed with the XPM3, you can't go wrong.
Electronics Forum | Fri Feb 16 04:15:57 EST 2018 | sachinverma
hi , please check the main S/w. of the Reflow machine.
Electronics Forum | Mon Jul 15 16:04:33 EDT 2024 | mistrthou
We're currently running a pair of XPM 820 Vitronics reflow ovens with a year 2000 vintage. I'm looking into either replacing both with used or one at a time new (and using the 2nd for spare parts). I priced a new delivered replacement from Vitronics
Electronics Forum | Tue Jul 16 07:55:46 EDT 2024 | ginny
> We're currently running a pair of XPM 820 > Vitronics reflow ovens with a year 2000 vintage. > I'm looking into either replacing both with used > or one at a time new (and using the 2nd for spare > parts). I priced a new delivere
