Electronics Forum | Wed Aug 31 17:23:00 EDT 2016 | corepride
Hi everyone, I have a problem with the 630 VME vision system: during startup machine, an error popup appears saying "Did not receive request to load machine model within timeout period. Possible machine error condition exists. Do you want to continu
Electronics Forum | Fri Sep 02 09:10:20 EDT 2016 | ttheis
Probably similar cost to find one on ebay or a used machine broker vs. repair unless the fault is obvious from visual inspection. I would be interested to know if anyone does service cards from these older VME chassis though.
Electronics Forum | Fri Sep 09 03:51:57 EDT 2005 | geb
Thanks for your help. Yes it is a VME630 Lantern vision system. I'll try swapping the card with the one in the other machine.
Electronics Forum | Mon Nov 23 13:46:14 EST 2015 | dilogic
It is written on power-up screen after booting USOS (green letters). I am attaching image of mine, but with newer VME630 vision. If yours shows AIS3500 there, it is probably a problem with video DAC inside that box (located on the machine rear end, a
Electronics Forum | Mon Apr 11 08:47:34 EDT 2005 | Rob
There's not many ways of doing it on the cheap except... Buy a second hand universal GSM1 with VME 630 vision, 0.5 mil per pixel camera & some expensive ceramic nozzles for the 0201's. This will be quite slow & the software quite awkward but lookin
Electronics Forum | Tue Nov 24 10:22:22 EST 2015 | ttheis
I checked and it is 630vme. I'll check input line filters as mentioned in next post.
Electronics Forum | Wed Aug 12 11:01:37 EDT 2015 | bnorton
Machine->Config and set all their addresses to 0. We have swapped the EPC5, the VGA Video, the Force board, and most recently the Lantern 630VME. Watching the Force board COMM2 with Logicomm, at the end of all the ldx file processing it changes to c
1 |