Electronics Forum | Wed Aug 22 20:18:17 EDT 2001 | mcox
I can send you a DOE I did on WS vs NC on BGA�s, but the results were.. NC = Had significantly less voiding both in number of voids and size of voids. A longer soak time (reflow oven) resulted in less voiding both for NC and WS. Mike
Electronics Forum | Wed Jul 16 21:38:27 EDT 2003 | sam
I have done a DOE on the SMT components, not the BGA, for reducing void within the solder. The result did not help in the void reduction, but confirmed that the speed of the IR oven, solder paste thickness may be the important factors for the void.
Electronics Forum | Wed Mar 14 13:16:54 EDT 2007 | Shane
I have a customer that designed a fine pitch BGA into a board, and has put small vias in the middle of each pad on the PCB. Anyone have any ideas on how I can prevent the solder from the BGA from flowing through the vias and causing voids or no cont
Electronics Forum | Fri Jan 15 13:35:03 EST 1999 | Terry Burnette
| I saw the problem of void in solder bump or in lead less component or some BGA. But I didn't have standard specification of that void is accept or reject? Do any body have the better idea or suggestion of the criteria ? | | Thank you, | Wirat
Electronics Forum | Fri May 02 09:37:23 EDT 2003 | Jerry Magera
Via in pad is the most efficient use of space. Blind via seems to be blamed for this. Cross-sections (send me some) will probably show a void still existing in the via or spherical voids aligned near the component pad side. One can estimate the vo
Electronics Forum | Tue Mar 06 14:10:52 EST 2001 | CAL
Are the voids in the balls of a BGA? Are you verifying this through x-ray if they are? some voids depending on size and location are some what accepted. Solder paste type? Solder paste date code? Humidity high? PCB's been stored in a truck trailer?
Electronics Forum | Thu Jan 15 09:40:47 EST 2004 | davef
Search the fine SMTnet Archives. For instance: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=24429 Do not get your hopes up about finding something to support your "leaching out of silver theory", though. * AgxSn IMC are disbursed ro
Electronics Forum | Mon Oct 07 09:05:41 EDT 2002 | russ
thnaks everyone for the the input. I have been noticing that a lot of comments are referring to 230 deg. C and such. has something changed in the industry lately? It has been to my knowledge previously to peak the reflow at 215 or so. I have many B
Electronics Forum | Thu Mar 25 11:30:33 EDT 2010 | Sean
Hello Rajeshwara, If not mistaken, the 25% solder void specification is for BGA...As I I as know, no specification given to mosfet component yet..I think you are right, I need to look at the stencil aperture in order to reduce the air trap underneat
Electronics Forum | Mon May 10 16:36:16 EDT 2004 | davef
Look here: http://www.aimsolder.com/techarticles/tech%20sheet%20BGA%20voiding-%20reducing%20through%20process%20optimization.pdf We have no relationship, nor receive benefit from the company linked above.