Electronics Forum | Wed Apr 07 17:03:50 EDT 2010 | duchoang
Hi Mabdalla, Attached is my VIOS file. The board dimension in your file is 285.75(L) x 215.90(W) I do not see the board thickness in your file. The dimension in my file is 192.7(L) x 153.67(W) x 1.8(T) Hope this info would help you a little.
Electronics Forum | Tue Aug 17 18:54:02 EDT 2010 | rob_thomas
Latest and greatest after discussing w colleagues w experience in commercial electronics. According to the 'Printed Circuits Handbook' by Clyde F Coombs JR, the number of "SMT solder rework cycles per component per board is kept to two-three. Beyond
Electronics Forum | Wed Apr 27 11:13:41 EDT 2011 | jhinckley
I have a 1800w that the main contactor will not pull in. When i push the contactor in manualy the power goes through but nothing turns on, when i push in the fan contactors all fans come on. The programs seem to load butnothing happens and the sp and
Electronics Forum | Fri Oct 27 03:02:54 EDT 2017 | praveenmuthusamy
Dear All, what might be the reasons for servo alarm on W axis in YXI(X RAY INSPECTION MACHINE)?? MAKER: YAMAHA TYPE: KLC-0000 NOTE:MACHINE CANNOT BE RESET UNLESS POWER SHUTDOWN. MACHINE RETURNS TO NORMAL STATE ONCE POWER SHUTDOWN AND RESATARTED! R
Electronics Forum | Fri Jan 04 05:50:37 EST 2019 | bane016
It's nice to see that you've solved the problem...panasonic npm w2 is very powerfull machine but asks everything to be perfect and everything is pure to work well...looking for a clean ventilated room without dust..regular maintenance daily, weekly,
Electronics Forum | Thu Apr 09 15:22:36 EDT 2020 | tbst
Hello, You can also use SD 218 -40 from HEP This is the Part who EKRA Company used After EOL from the HF The EKRA-Part.Nr. Is 5340000133 Its to use for 2x T8 , 18 , 25 36 W Or if you find Dome Times EKRA has used Quicktronic del Luxe HF36 for 2x 36
Electronics Forum | Tue Aug 11 12:55:39 EDT 2020 | alanyang
We need 12Kpcs 88W8790-A1-BLF2C00-P162 from Marvell Avastar. If you have it in stock, could you pls provide photoes of the part and its detailed datasheet. https://pcbboardassembly.com
Electronics Forum | Sat Oct 03 21:36:33 EDT 2015 | cadco
Update 6 Oct 15: We have completely re-configured the oven PID boards such that everything is now visible on the oven by the s/w and all is now OK since the "Machine"card is now recognized. We have just one additional procedure to do and that is
Electronics Forum | Sat Nov 05 00:53:43 EST 2005 | mika
Hello again mr vickt, The thing I was thinking about is just that: the UPS S/W. There is a lot of programming codes in the s/w, I know that. There is a lot of specific operation of the base machine controlled by s/w, not to mention all the extra opti
Electronics Forum | Wed Feb 07 09:46:20 EST 2001 | pjc
I need some guidance here. I've got a new board w/ a FBGA-48 package, Samsung CMOS SRAM. It's a full matrix BGA w/ 0.30mm-0.40mm ball diameter @ 0.75mm pitch. Balls are eutectic. PCB land diameter is 0.4mm. There are TSOP I 0.5mm lead pitch component
