Electronics Forum | Mon Sep 11 00:31:13 EDT 2000 | rcsantos
Is there somebody who knows if there is a machine already available in market that can transfer die from wafer to waffle tray. This machine should a stand alone type or can be integrated to some P&P machine. What I'm trying to say is just like the on
Electronics Forum | Wed Sep 13 07:17:32 EDT 2000 | Paul Gerits
Dear Sir, It is possible depending on the exact application. At the moment only way to go direct from die to waffle or PCB is with Hover Davies direct die feeders on Philips EMT (ACM, advanced component mounter), Universal and Siemens machines. This
Electronics Forum | Tue Sep 12 03:36:50 EDT 2000 | PeterB
I have just read that Hover-Davis now manufacture a direct die feeder which can feed directly from wafer to P & P machine compatible with a number of different placement machine manufacturers. Perhaps this will help? Best regards
Electronics Forum | Tue Sep 19 22:12:06 EDT 2000 | rcsantos
Dear Mr. Gerits, Thank you very much for the information. You'd mentioned about Laurier horizontal die feeders, Is Laurier is feeder manufacturer also? Please advise, Best Regards, Raul C. Santos
Electronics Forum | Mon Sep 11 20:41:09 EDT 2000 | Dave F
Try: * Semiconductor Equipment 5154 Goldman Ave Moorpark CA 93021 805.529.2293 fax 2193 * Palomar ?? (Hughes Aircraft, Technology Products) 2051 Palomar Airport Rd., Carlsbad, CA 92009 619.931.3622 fax5191 Jeff King appl x3629 * Kulicke&Soffa, 201 B
Electronics Forum | Fri Jan 11 12:09:14 EST 2008 | john_smith
Maybe you have the wrong waffle pack assigned to the machine. I don't have alot of experience with a f3 though.Are you using the UNIX based software?
Electronics Forum | Sat Jan 12 09:00:54 EST 2008 | mefunak
The Siplace Desktop has a special initial offsets for waffles, look in Settings/Global
Electronics Forum | Mon Jan 14 11:26:42 EST 2008 | edmneb
I am using the older Unix software. It had been said that I could possibly be using the wrong kind of WPC in the station configuration. I am not that familiar with these machines yet, so I am not real positive on what I am seeing on the config files
Electronics Forum | Sat Feb 09 09:39:11 EST 2008 | stockley
You have my sympathy, the Line computer Station configuration screen is hard to get your head around. Assuming that you have configured the station correctly you might need to re-compile the station and/or consistency check it to see of it passes.
Electronics Forum | Mon Jan 14 12:35:28 EST 2008 | dphilbrick
Jay Go to the Services menu and then station configuration. Choose your F3 machine from the list. This will open the tool that allows you to configure what the machine has on it. Look to see if you have a box with the following: WPC-TR S_WPW_80F
