Electronics Forum | Mon May 13 06:15:12 EDT 2019 | dhanish
how to control warpage on panelized pcb during reflow process.we are already running with pallet.Encountering problem to insert the pcb into pallet after first reflow cycle.The insertion is being done by robotic arm. Any recommendation on the profile
Electronics Forum | Thu May 23 10:21:19 EDT 2019 | emeto
What is the material of this PCB?
Electronics Forum | Mon Jul 01 04:39:49 EDT 2019 | sssamw
yes, You need tell us how the PCB and board designed, size, material, how de-paneling the PCB?
Electronics Forum | Mon Jul 01 09:33:08 EDT 2019 | dbuschel
if you can't change the PCB materials or design at this point, you might be able to reduce it somewhat through the use of fixtures or edge stiffeners. Unless it is a particularly thick board, I don't think the reflow profile would be the issue. The t
Electronics Forum | Mon May 13 06:38:41 EDT 2019 | relaycz
You need to give us a little more information. 1. What is the size of your panel? 2. Are there any heavy components? 3. What is the thickness of your board panel? 4. What kind of oven are you using? 5. Is it only a recent problem or ongoing one?
Electronics Forum | Mon May 13 23:44:26 EDT 2019 | dami0629
if use tray cannot solve the problem, you can change from the design 1）Reduce the effect of temperature on PCB 2) PCB USE HIGH TG 3) BOARD THICKNESS TOO THIN 4) MODIFY THE BOARD SIZE 5) Reduce the V-CUT depth.
Electronics Forum | Sat Sep 12 09:24:33 EDT 2020 | majdi4
at first , you need to optimise your panel design ( lenght width & postage stamp ) , use an anti-buckling cable during first reflow , and you can put trays under your panel during first reflow..
Electronics Forum | Tue Oct 07 03:55:03 EDT 2014 | puja
How to avoid /reduce warpage in long length PCB &
Electronics Forum | Tue Oct 07 22:15:12 EDT 2014 | padawanlinuxero
How to avoid /reduce warpage in long length PCB & > _1.6MM THICK PCB. You need to put it in a fixture or pallet to run it in the reflow oven, most common material use here is durostone for the pallets that we run in the reflow oven, we use Durosto
Electronics Forum | Tue Oct 07 08:44:49 EDT 2014 | emeto
Hi, 1. I will run the board on the mesh if single sided. 2. For double sided board, I will try stiffeners. 3. If stiffeners don't work, then you have to create a handling fixture(holds the board and has enough openings to let the air flow to the PC
